who is spraying 150 DRY?
who is spraying 150 DRY? Please let me know what has to be done to be able to spray over 125 HP. DRY
i see Dry systems that come only with 125 HP shot Max.
and hear to only spray 100,
my car is a 01 SS so i do have the larger 28 -28.8 stock fuel injectors.
And i will be installing a intake Racetronix fuel pump soon.
I am very interested in 2 kits, One is the DynoTune single nozzle Dry system, because i can hid this system, and Play Stelth.
The other system i am VERY interested is the New nos 05168 wet LS1 plate system, This system is very clean, and looks nice under the hood unlike the bulky TNT wet power ring system i used to have, with a little wire loom and a cover to hide the noids and maybe a electronic 4.5volt NX throtle switch , this system would be 90% stelth.
Nos also makes this kit for the new C6 Vette.
But i am not jumping to buy it , dont know of anyone using it yet ,
i see Dry systems that come only with 125 HP shot Max.
and hear to only spray 100,
my car is a 01 SS so i do have the larger 28 -28.8 stock fuel injectors.
And i will be installing a intake Racetronix fuel pump soon.
I am very interested in 2 kits, One is the DynoTune single nozzle Dry system, because i can hid this system, and Play Stelth.
The other system i am VERY interested is the New nos 05168 wet LS1 plate system, This system is very clean, and looks nice under the hood unlike the bulky TNT wet power ring system i used to have, with a little wire loom and a cover to hide the noids and maybe a electronic 4.5volt NX throtle switch , this system would be 90% stelth.
Nos also makes this kit for the new C6 Vette.
But i am not jumping to buy it , dont know of anyone using it yet ,
The reason, I believe, the dry kits only come with jets for 125 crank hp is because they need to cover their buts on the 26lb cars (often mildly built). with a good fuel pump 28lbs can support 425/450 rwhp for short n2o blasts. Check one of the recent posts on dry for more detailed info on this. I like the looks of the new NOS plate also. Nitro Dave has a plate too.
Robert
Robert
Originally Posted by Lawnboy
would the car's ECM need to be retuned if #30 svo fuel injectors are installed?
also Robert what do you mean by short N02 blasts?, would this include a 1/4 blast?
also Robert what do you mean by short N02 blasts?, would this include a 1/4 blast?
Robert
I went to the track with my car this past weekend.
I'm running a dual dry system set on 150hp shot.
I had a wonderful experience with " reduce engine power" issues this weekend at the track. so burnouts were impossible. I had since fixed my issues. but with my 1.8xx 60' on new 28" slicks,
I managed a 10.91x@125.xx mph
my PB cam only before was 11.45@118, on 26" slicks.
I'm happy with the 10.9 time but look forward to marching that number in a southern direction in spring
LOVE THE DUAL DRY SHOT. SO MUCH FUN, I'm running SVO#30's btw, spraying pre maf, adding additional fuel with a MAFTranslator
JEFF
I'm running a dual dry system set on 150hp shot.
I had a wonderful experience with " reduce engine power" issues this weekend at the track. so burnouts were impossible. I had since fixed my issues. but with my 1.8xx 60' on new 28" slicks,
I managed a 10.91x@125.xx mph
my PB cam only before was 11.45@118, on 26" slicks.
I'm happy with the 10.9 time but look forward to marching that number in a southern direction in spring
LOVE THE DUAL DRY SHOT. SO MUCH FUN, I'm running SVO#30's btw, spraying pre maf, adding additional fuel with a MAFTranslator
JEFF
hi 99slowC5
thats some good MPH and ET, so your total Dry nitrous shot is 150 ?
Did you retune your PCM for the #30 SVO injectors ,
and are you spraying through the Mass air? not after it?
Thank you for you help
thats some good MPH and ET, so your total Dry nitrous shot is 150 ?
Did you retune your PCM for the #30 SVO injectors ,
and are you spraying through the Mass air? not after it?
Thank you for you help
Trending Topics
the PCM has been tuned for the cam and injectors, along with driveability, and all the other great things that need to be tuned for a cam, headers, and nitrous
I'm spraying through the MAF. I'm using the MAF and MAF translator to add the additional fuel needed for the nitrous. MY PCM is tuned NA. thats why im spraying before the MAF and using the MAFT+.
JEFF
I'm spraying through the MAF. I'm using the MAF and MAF translator to add the additional fuel needed for the nitrous. MY PCM is tuned NA. thats why im spraying before the MAF and using the MAFT+.
JEFF
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Nice run 99SlowC5, congrats, gotta love that single stage dual nozzle dry.
I forgot to mention the 11.04 run in my sig was on stock injectors and fuel pump running a 125rwhp shot dry dual stage. It also would have been a 10.xx run but I hit the rev limiter in 3rd gear (.100 lose).
Robert
I forgot to mention the 11.04 run in my sig was on stock injectors and fuel pump running a 125rwhp shot dry dual stage. It also would have been a 10.xx run but I hit the rev limiter in 3rd gear (.100 lose).
Robert
Last edited by Robert56; Nov 9, 2005 at 01:07 PM.
Originally Posted by 99SLOWC5
I went to the track with my car this past weekend.
I'm running a dual dry system set on 150hp shot.
I had a wonderful experience with " reduce engine power" issues this weekend at the track. so burnouts were impossible. I had since fixed my issues. but with my 1.8xx 60' on new 28" slicks,
I managed a 10.91x@125.xx mph
my PB cam only before was 11.45@118, on 26" slicks.
I'm happy with the 10.9 time but look forward to marching that number in a southern direction in spring
LOVE THE DUAL DRY SHOT. SO MUCH FUN, I'm running SVO#30's btw, spraying pre maf, adding additional fuel with a MAFTranslator
JEFF
I'm running a dual dry system set on 150hp shot.
I had a wonderful experience with " reduce engine power" issues this weekend at the track. so burnouts were impossible. I had since fixed my issues. but with my 1.8xx 60' on new 28" slicks,
I managed a 10.91x@125.xx mph
my PB cam only before was 11.45@118, on 26" slicks.
I'm happy with the 10.9 time but look forward to marching that number in a southern direction in spring
LOVE THE DUAL DRY SHOT. SO MUCH FUN, I'm running SVO#30's btw, spraying pre maf, adding additional fuel with a MAFTranslator
JEFF
Jeff,
Looks like you are enjoying our dual nozzle dry kit.
How did you like the quality of the system?Dave
Originally Posted by 99SLOWC5
I LOVE it Dave, Couldn't be happier. I tell everyone thats asks about nitrous to call you 
you ever get me backordered T-shirts in?
JEFF
you ever get me backordered T-shirts in?
JEFF
Dave