Nitrous Related Wiring
Teching In
Joined: Mar 2008
Posts: 21
Likes: 0
I need a wiring diagram for the following:
Dynotune single nozzle wet kit
FPSS
MSD #8969 Window switch
WOT Switch
HSW Purge system
NOS orange bottle heater
Nitrous Outlet Center console switch panel with pressure gauge
thanks in advance
Dynotune single nozzle wet kit
FPSS
MSD #8969 Window switch
WOT Switch
HSW Purge system
NOS orange bottle heater
Nitrous Outlet Center console switch panel with pressure gauge
thanks in advance
Found this diagram to use. Can anyone add a dedicated fuel, purge, and bottle heater or at least lead me in the right direction with it? Using the nitrous outlet ashtray panel.
Thanks.
Thanks.
On The Tree
Joined: Aug 2010
Posts: 190
Likes: 0
From: Dallas
I have a nitrous outlet wet plate kit with their progressive nitrous controller and a lingenfelter LNC-002 activated by an WOT switch. I was wonder if the LNC needs to be activated before the nitrous or at the same time?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Building a nitrous switch panel, what switches? I'm going to put together a switch panel for my nitrous setup. What kind of switch will I need to arm it and what will I need to activate the bottle heater?
I have a second hand wet kit with no instructions and I'm lost. Can somebody help me with a wiring diagram for a single stage wet kit. I have a dynotune window switch, heater, purge, FPSS and a ashtray switch plate.
Thank you.
Thank you.
Registered User
Joined: Nov 2011
Posts: 2
Likes: 0
Guys i have a question about this diagram and the nos mini controller? Doesnt the WOT microswitch have to have a 12v switched power source? Also the green wire for the mini doesnt it go to the MSD tach input source and the yellow CH1 would go to a retard box? Thanks
Registered User
Joined: Nov 2011
Posts: 2
Likes: 0
Guys i have a question about this diagram and the nos mini controller? Doesnt the WOT microswitch have to have a 12v switched power source? Also the green wire for the mini doesnt it go to the MSD tach input source and the yellow CH1 would go to a retard box? Thanks
Teching In
Joined: Jul 2011
Posts: 41
Likes: 0
From: Pacific WA
Im looking for some help on wiring up a kit in my gto, This is what im looking at if any body can help.
zex wet kit
zex window switch
Lingenfelter LNC-2000
Nitrous outlet GTO switch pannel
purge and bottle warmer
If its in this thread I must of missed it. thanks
zex wet kit
zex window switch
Lingenfelter LNC-2000
Nitrous outlet GTO switch pannel
purge and bottle warmer
If its in this thread I must of missed it. thanks
Looks like not much help in this thread anymore.... ??? but might get someone to help.... needa hook up my msd window switch.... im running a full throttle switch and not sure where the yellow(normally opened) and grey (normally closed) go? could someone help me out?
12 Second Club
iTrader: (2)
Joined: Jan 2011
Posts: 1,215
Likes: 1
From: Old Bridge, NJ/Corpus Christi, TX
Anyone still doing these diagrams?!? I need one for the following. NO LT1 plate kit with purge, NO Window switch (using tps instead of a wot switch), NO ashtray switch panel, Pressure regulated bottle heater, Mallory 685 to pull timing. All going on a 94 Z28...
