a-mean-89-iroc

iTrader: (4)

Hey guys i need a diagram for a carb'd engine. I have a wet kit. I really just need to know how to wire it up right with the WOT switch. Thanks!

Ray@Nitrous Outlet

carb and efi will wire the same.....any of the diagrams will work.

Bill Bowling

iTrader: (6)

Where does everyone get their 12 v switched and 12 v battery from the inside of the car?

Bill

FASTFATBOY

iTrader: (23)

Hey guys I need a diagram for....

Nos Single stage big shot plate

FPSS

microswitch activation on button

Accel 300+ with the 375+ retard box(12 volt retard activation)

Stand alone fuel system.



Thanks

Ray@Nitrous Outlet

Single stage with NX TPAS, Nitrous Outlet 4 dial progressive, and MSD window switch

Ray@Nitrous Outlet

the fuel systems relay should connect pin 86 to the ACC pin from the master arm switch

1BADAIR

iTrader: (1)

Does anyone have a link for
2 stage nx kit with tps, fpss, timing tuner for the first stage and a window switch controlled second stage(only with first stage on of coarse)
I had it but lost my printout

matt94z

iTrader: (49)

Ayonne have a diagram for a Nitrous Outlet LT1 plate kit with a fpss, purge,and NOS mini controller? Thanks in advance.

Ray@Nitrous Outlet

Captain InsaneO

iTrader: (38)

Is there any way to get this again? I guess it's been deleted.

waterbug1999

iTrader: (3)

You see the post above ya? Click on Ray's fquick and see if its in there. I believe someone moved them somewhere else.

Captain InsaneO

iTrader: (38)

I guess I need to make an account up to see them..

Captain InsaneO

iTrader: (38)

Nope, it's not there.

waterbug1999

iTrader: (3)

Sorry... just thought it might.

JoeMama's GTO

iTrader: (3)

Has anyone wired up their noids in series so that they both have to open or is there not enough voltage?

Captain InsaneO

iTrader: (38)

Actually what I am looking for is the NX Single Stage w/ Mallory WS. I have the old style WS. The wires are: 2 orange 1 black 1 red 1 green 2 purple (not used).

From what I can see the black is of course a ground, red is hot, green goes to the tach wire, one orange to the on/off button, and the other orange goes to the red wire off the relay. It looks pretty simple, but for some reason I keep thinking... it wasn't.

datsbad

iTrader: (3)

Looking for transbrake, 2 step and NOS switch wiring.

transbrake activated and 2 step at once, NOS shut down till transbrake/2 step button is released.
Thanks

Ray@Nitrous Outlet

its in this thread or in the link in my sig

datsbad

iTrader: (3)

I dont see it.

Ray@Nitrous Outlet

https://ls1tech.com/forums/showpost....&postcount=135