New Gauge/Panel Setup
New Gauge/Panel Setup Decided to change things up a bit, I got a Trick Performance V Series gauge/controller from Nitrous Outlet (thanks Chris for the rush shipping!), to add safeties to my Nitrous setup. I created a new panel from lessons learned this year, LOL the major change is the stage indiction lights in the ashtray area...pretty useless, so I moved those to the pillar pod.
Anyways just wired it up and got everything workin...
Here are some pics.
New Gauges in Place
New Nitrous Panel...deleted the gauge power switch the EFI tune switch (hard-wiring that to be automatic tune switching), deleted the heater (Heater is controlled by the new Trick Performance Black Gauge), moved the LC-1 Cal button to cab vice the engine bay.
Cleaned up the wiring on the back side of the new panel
Here is the new gauge with the WB inputs and Bottle Pressure readout
You can switch the display to AFR only (or Boost) as well. You can configure the Gauge to fire the nitrous only when within safe AFR's.
Anyways just wired it up and got everything workin...
Here are some pics.
New Gauges in Place
New Nitrous Panel...deleted the gauge power switch the EFI tune switch (hard-wiring that to be automatic tune switching), deleted the heater (Heater is controlled by the new Trick Performance Black Gauge), moved the LC-1 Cal button to cab vice the engine bay.
Cleaned up the wiring on the back side of the new panel
Here is the new gauge with the WB inputs and Bottle Pressure readout
You can switch the display to AFR only (or Boost) as well. You can configure the Gauge to fire the nitrous only when within safe AFR's.
Nice work Beer. I'm getting ready to rewire my nitrous kit along with wiring in my second kit. I'm also waiting on three new gauges to show up and will put those in a triple pillar. I like the single wires used for the powers and grounds. I'm going to have to try that out.
Trending Topics
Nice lookin work dude, out of curiosity, where do you get the material to make the panel, that stuff is nice, I need to buy some to make a switch panel/gauge mounting spots where my radio and hvac controls used to be, right now I have something in there, but it's ugly!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Nice lookin work dude, out of curiosity, where do you get the material to make the panel, that stuff is nice, I need to buy some to make a switch panel/gauge mounting spots where my radio and hvac controls used to be, right now I have something in there, but it's ugly!
I just need something a little bigger than that opening (when you take the cover off it's not split, one big opening) that I could trim to fit. I wanna put all the switches in the bottom thin part and put spots for the gauges in the thicker top part. It should look pretty nice!
Can not wait to spray with it next month. 
