Going to run a 2 stage NX kit that I just purchased which window switch would you recommend or how would you control it and is there a wiring diagram on here for a 2 stage thanks guys.

 

If your window switch is has two outputs then it's easier...

http://www.dynotunenitrous.com/store...%20WET&DRY.pdf should get you close...
Cheers
Dan

 

Which window switch is best to run then. thanks

 

I think Dan was meaning to give you this link.
http://www.dynotunenitrous.com/store...?idproduct=194

 

I use a 2 stage NX maf kit with a timing tuner controlling the first stage and a window switch on the second stage

 

There are so many good controllers out there these days. Just check out the features for what you need/like, then pick your style. All vendors offer a few.
Robert

 

On that TH400 you inquired about.... I could show you how to wire up the trans brake in such a manner as to allow WOT on the brake and Nitrous not spray. Not sure if you are familiar with that.... look me up if it interests you.

g

 

does someone have a wiring diagram for a 2stage nx kit with a dual window switch.

 

If you get that 2-stage switch from Dynotune or Nitrous Outlet, it has the wiring diagram included. I just installed one in mine last week.

99 FRC