The money maker
Thread Starter
12 Second Club
Joined: Aug 2007
Posts: 98
Likes: 0
The money maker Has anyone purchased the money maker from the nitrous outlet? I don't want to know how its installed. I know thats top secret. I do want to know how well it works and how easy it was to install. Is it worth the $800 bucks? I'm going to buy my first system and I thought the money maker might be a good idea. There are so many system to buy its driving me crazy.
I had one. It's a great system if you want to keep it top secret. To be honest it worked good but a real pain if you want to change jets due to the location. Also, if you don't have a catch can, oil builds up on the lines and can plug up the pin wholes where the nitrous and fuel comes out. Other then that, it's a great system.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Last edited by Bad Habit Bird; Jan 4, 2008 at 09:40 AM.
I can't be that much different than a traditional NOS brand the plumbs under the intake and has bulkheads at the back of the block. I guess it would probably be on the back of the intake for this application though. It's probably something like this but on the inside of the intake. It can be but only so many ways. 
Staging Lane
Joined: Jul 2003
Posts: 91
Likes: 0
From: MIA
I can't be that much different than a traditional NOS brand the plumbs under the intake and has bulkheads at the back of the block. I guess it would probably be on the back of the intake for this application though. It's probably something like this but on the inside of the intake. It can be but only so many ways.
I've got a pretty good idea of what it is like, I was just using that as a demo. It probably uses some sort of spray bar like a carb style plate as it would be a lot less air restrictive on the inside of the intake. I knew that it would only use two jets as anything else would mean having to remove the intake.
