Hello all, i have been digging through the sponsers and can't seem to find what i am looking for. I am currently running an NX universal wet kit. I want to change it to a plate setup, the only thing i could find was kits. Any one know of any conversions?

 

nitro dave has a converstion kit. it is no doudt one of the best plates around for a lt1 and im not just saying it cuz i have one.

 

The only problem with his is from what i read i would have to upgrade the throttle body.

 

Hmmm last I saw he had a plate for stock and a plate for the 58mm TB. I thought??
I know when I ordered the kit I had to pick between stock and the larger TB.

 

yeah he makes a 52mm and a 58mm. The 52mm can be ran with the stock tb and stock intake manafold. The 58mm you would have to open up the two ports on the intake. i am running a 58 mm plate with stock tb and but i had to opened up the intake a little.

 

Yes, you will need to upgrade to a 52mm TB to use his plate kit.
I'm running the 52mm plate myself.

 

that sucks, anyone else have one, trying to be pretty cheap on that part seeing as how i will be doing safty upgrades to my system...

 

52mm Plate Conversion
http://www.nitrousoutlet.com/catalog...roduct_id=2807
To run this plate you wont have to modify anything.

58mm Plate Conversion
http://www.nitrousoutlet.com/catalog...roduct_id=2808
To run this plate all you will need to do is open the intake holes from 52mm to 58mm and you can still run the stock TB ( If you wanted to ) without a problem.

Mono Blade Conversion
http://www.nitrousoutlet.com/catalog...roduct_id=2834

-Chris

 

Thanks ^^^

 

Is switching to a plate from a nozzle worth 300 dollars?