Power to be gained and safety of setup????
Power to be gained and safety of setup???? A local guy is trading me his NOS wet plate kit for my old rear end setup next week. I want to run a 100 shot on top of my current setup. I have:
231/237 112LSA cam
FAST 90/90
Lt headers/ORY/ catback
racetronix fuel pump
lid
M6
All i have to do is buy the 90mm plate. With my current setup i am making around 415 rwhp, what kind of HP and TQ can i expect on a 100 shot? I have heard of gaining more than 100 rwhp, which i would be afraid of because of my stock bottom end. What do you guys think about this?
231/237 112LSA cam
FAST 90/90
Lt headers/ORY/ catback
racetronix fuel pump
lid
M6
All i have to do is buy the 90mm plate. With my current setup i am making around 415 rwhp, what kind of HP and TQ can i expect on a 100 shot? I have heard of gaining more than 100 rwhp, which i would be afraid of because of my stock bottom end. What do you guys think about this?
Ahhh, I sold a 30th Ann. T/A for a friend of mine to a guy in New York, Just curious...
As far as your question.....With a safe tune up you will see somewhere arond 100 rwhp gain and over 100 rwtq since you have a M6. The lower the rpm's the more torque you will make. Just to be safe I would buy a window switch and set it to come on at 3K RPM's and go off at 6500 RPM's. A FPSS wouldn't be a bad idea either.
Just search around in here, there are hundreds of threads just like yours, you should be able to find answers to any questions you may have.
As far as your question.....With a safe tune up you will see somewhere arond 100 rwhp gain and over 100 rwtq since you have a M6. The lower the rpm's the more torque you will make. Just to be safe I would buy a window switch and set it to come on at 3K RPM's and go off at 6500 RPM's. A FPSS wouldn't be a bad idea either.
Just search around in here, there are hundreds of threads just like yours, you should be able to find answers to any questions you may have.
Trending Topics
As i mentioned, the kit has the stock size plate, and i have a FAST 90, will this plate work for me? i THINK LS2's are 90mm (?)
http://www.nitrousoutlet.com/catalog...roduct_id=1650
http://www.nitrousoutlet.com/catalog...roduct_id=1650
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo As i mentioned, the kit has the stock size plate, and i have a FAST 90, will this plate work for me? i THINK LS2's are 90mm (?)
http://www.nitrousoutlet.com/catalog...roduct_id=1650
http://www.nitrousoutlet.com/catalog...roduct_id=1650
I don't know if LS2's are 90mm, but there have been a few used plates that are 90's lurking around the lsx for sale area.
I cut 8 tenths off my 1/4 mile time with a 100 wet shot two weeks ago and all I had was a catback. You should expect 100 rwhp and nearly 150 rwtq off a 100 shot, whether you run a M6 or A4. Torque should always be around 150% of the hp tuneup you install.
I can't wait to install my 3000rpm fuddle and go back to the track...
Have fun with it!
I cut 8 tenths off my 1/4 mile time with a 100 wet shot two weeks ago and all I had was a catback. You should expect 100 rwhp and nearly 150 rwtq off a 100 shot, whether you run a M6 or A4. Torque should always be around 150% of the hp tuneup you install.
I can't wait to install my 3000rpm fuddle and go back to the track...
Have fun with it!
