97 trans am ws6 part-out
10-15-2008, 12:50 PM
#1
Staging Lane
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: Austin, TX
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
97 trans am ws6 part-out I'm parting out my dark green 1997 Trans Am WS6, I’ll take Paypal only. Please reply to the post and me if you'd like to claim something.
All parts are in Austin, Texas, shipping will be extra (unless otherwise noted by price) just PM me for a quote, but you can assume $8-$10 for small/light items.
Transmission is already sold.
Engine/exhaust:
I’m trying to sell the complete engine first, i'll part it out later if i have no luck. PM me for more details if you are interested, i have dyno graphs, track times, and receipts: 355 ci (50k miles on it) w/ forged rods/pistons, PCM w/ custom dyno tune, crane 210/224 cam, LE2 heads, 54mm tb(not shown in picture but it's an as&m), 1.6rr, 30# injectors, etc. made 360 rwhp/354 rwtq SAE on a chassis dyno (so somewhere around 410 flywheel hp if you want to compare against crate engines) - $2750.
Stock MAF (w/ screen in place) - SOLD
Arizona Speed and Marine 1&3/4" headers with random tech dual-cat y-pipe, slip fit #1 primary has a gouge through it so it needs to be welded up (i'll do this or you can take $25 off the price and take it as-is) - $325 headers + $225 y-pipe, $550 for the both.
Also have an off-road y-pipe for the headers if you want a catless setup -$30 shipped
Thunder Racing Billet Aluminum PVC catch can w/ bracket- SOLD
Electronics:
1997 PCM w/ stock programming - $110 (I’ve got both A4 and M6 stock tunes so just tell me which one you need, I can also tweak the tune for you for a little extra)
Doorlock actuators - $20 each
JL Audio Power wedge 3 x 10" speaker enclosure with 3 brand new Kicker 07C108 Comp subs - $225
MTX Audio thunder302 amp, 300 watts bridged. Needs a new RCA input jack connectors - $35
Suspension/wheels:
I have a total of 5 Stock WS6 17" rims:
2 are in very good condition with bald nittos - SOLD
3 are in ok condition (curb rash and flaking clear coat), just the rims, no tires - SOLD
LG Motorsports Poly/Rod-end adjustable panhard rod - $100
BMR tubular Poly/Rubber LCAs - SOLD
Energy Suspension Poly transmission mount - SOLD
Energy Suspension poly torque arm bushing - $10
continued in next post...
All parts are in Austin, Texas, shipping will be extra (unless otherwise noted by price) just PM me for a quote, but you can assume $8-$10 for small/light items.
Transmission is already sold.
Engine/exhaust:
I’m trying to sell the complete engine first, i'll part it out later if i have no luck. PM me for more details if you are interested, i have dyno graphs, track times, and receipts: 355 ci (50k miles on it) w/ forged rods/pistons, PCM w/ custom dyno tune, crane 210/224 cam, LE2 heads, 54mm tb(not shown in picture but it's an as&m), 1.6rr, 30# injectors, etc. made 360 rwhp/354 rwtq SAE on a chassis dyno (so somewhere around 410 flywheel hp if you want to compare against crate engines) - $2750.
Stock MAF (w/ screen in place) - SOLD
Arizona Speed and Marine 1&3/4" headers with random tech dual-cat y-pipe, slip fit #1 primary has a gouge through it so it needs to be welded up (i'll do this or you can take $25 off the price and take it as-is) - $325 headers + $225 y-pipe, $550 for the both.
Also have an off-road y-pipe for the headers if you want a catless setup -$30 shipped
Thunder Racing Billet Aluminum PVC catch can w/ bracket- SOLD
Electronics:
1997 PCM w/ stock programming - $110 (I’ve got both A4 and M6 stock tunes so just tell me which one you need, I can also tweak the tune for you for a little extra)
Doorlock actuators - $20 each
JL Audio Power wedge 3 x 10" speaker enclosure with 3 brand new Kicker 07C108 Comp subs - $225
MTX Audio thunder302 amp, 300 watts bridged. Needs a new RCA input jack connectors - $35
Suspension/wheels:
I have a total of 5 Stock WS6 17" rims:
2 are in very good condition with bald nittos - SOLD
3 are in ok condition (curb rash and flaking clear coat), just the rims, no tires - SOLD
LG Motorsports Poly/Rod-end adjustable panhard rod - $100
BMR tubular Poly/Rubber LCAs - SOLD
Energy Suspension Poly transmission mount - SOLD
Energy Suspension poly torque arm bushing - $10
continued in next post...
Last edited by kyle97; 11-12-2008 at 02:27 PM.
10-15-2008, 12:51 PM
#2
Staging Lane
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: Austin, TX
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Interior:
Cloth graphite interior:
Front/Rear seats - $350 for the complete set
Driver and Passenger Door panels - SOLD
Headliner (perfect condition!) - SOLD
Complete owner’s manual - $22
WS6 Emblem - SOLD
Not pictured items (PM me if you are interested but want to see pics):
Air pump - $30
Air pump with one broken mounting ear -SOLD
power steering pump, new never installed- SOLD
water pump, brand new Duralast, never installed, comes with gaskets - SOLD
window lift motor, new never installed - SOLD
window lift motor, only about 2k miles on it - $30 shipped
fuel sending unit - $25 shipped
Prothane poly motor mounts - $40
Gauge cluster - $70
Driver’s side taillight - $50
Taillight center section from a Formula - $25
Power accessory wiring harness (doorlocks/windows/mirrors) - $25
Monsoon 12 disk changer - SOLD
Monsoon speakers (door mids/tweeters and hatch mids/tweeters) - SOLD
Monsoon Amp - $30 shipped
power antenna - $60 shipped
10" front oxygen sensor extension (flat 4 pin) - SOLD
40" rear oxygen sensor extension(square 4 pin) - $17
ABS control module - SOLD
WS6 springs (front and rear) - $75 shipped
WS6 sway bars (front 32mm, rear 19mm) - SOLD
a/c evaporator - $35 shipped
heater core - SOLD
12 point ARP Stainless 1" header bolts (set of 15)- $18 shipped
spare jack - $30 shipped
anti-theft/impact sensor from hatch - $25 shipped
stock ignition coil - $18 shipped
comp hi-energy hardened pushrods, stock 7.200 length - $25 shipped
throttle cable - $22 shipped
Everything else:
The car itself has significant body damage to the front, but rest of the car is in good shape. Major suspension components like ws6 sway bars and springs are fine. Let me know if there is any random part in particular you want or if you are interested in buying the rest of it, has a salvage title.
Cloth graphite interior:
Front/Rear seats - $350 for the complete set
Driver and Passenger Door panels - SOLD
Headliner (perfect condition!) - SOLD
Complete owner’s manual - $22
WS6 Emblem - SOLD
Not pictured items (PM me if you are interested but want to see pics):
Air pump - $30
Air pump with one broken mounting ear -SOLD
power steering pump, new never installed- SOLD
water pump, brand new Duralast, never installed, comes with gaskets - SOLD
window lift motor, new never installed - SOLD
window lift motor, only about 2k miles on it - $30 shipped
fuel sending unit - $25 shipped
Prothane poly motor mounts - $40
Gauge cluster - $70
Driver’s side taillight - $50
Taillight center section from a Formula - $25
Power accessory wiring harness (doorlocks/windows/mirrors) - $25
Monsoon 12 disk changer - SOLD
Monsoon speakers (door mids/tweeters and hatch mids/tweeters) - SOLD
Monsoon Amp - $30 shipped
power antenna - $60 shipped
10" front oxygen sensor extension (flat 4 pin) - SOLD
40" rear oxygen sensor extension(square 4 pin) - $17
ABS control module - SOLD
WS6 springs (front and rear) - $75 shipped
WS6 sway bars (front 32mm, rear 19mm) - SOLD
a/c evaporator - $35 shipped
heater core - SOLD
12 point ARP Stainless 1" header bolts (set of 15)- $18 shipped
spare jack - $30 shipped
anti-theft/impact sensor from hatch - $25 shipped
stock ignition coil - $18 shipped
comp hi-energy hardened pushrods, stock 7.200 length - $25 shipped
throttle cable - $22 shipped
Everything else:
The car itself has significant body damage to the front, but rest of the car is in good shape. Major suspension components like ws6 sway bars and springs are fine. Let me know if there is any random part in particular you want or if you are interested in buying the rest of it, has a salvage title.
Last edited by kyle97; 11-22-2008 at 05:18 PM.
10-15-2008, 03:34 PM
#3
Launching!
iTrader: (15)
Join Date: Apr 2007
Location: Clear Lake, Houston, Tx
Posts: 247
Likes: 0
Received 0 Likes
on
0 Posts
Im after these parts: Please PM me...
The triangle on the DS:
The whole driver side window or just the this broken bracket... its the one near the rear of the door:
-justin
The triangle on the DS:
The whole driver side window or just the this broken bracket... its the one near the rear of the door:
-justin
Trending Topics
10-16-2008, 12:56 PM
#8
i need the trim piece that goes along the bottom of the drivers side door on the interior...
and also pm me a price on all stereo stuff(head unit, and all speakers)
does the car still have ac? i need all the ac lines/drier/ac compressor
lmk man....
thanks
and also pm me a price on all stereo stuff(head unit, and all speakers)
does the car still have ac? i need all the ac lines/drier/ac compressor
lmk man....
thanks
10-16-2008, 01:31 PM
#9
Staging Lane
Thread Starter
iTrader: (10)
Join Date: Feb 2004
Location: Austin, TX
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Door lock actuators were working fine when i removed them.
Sorry, headlights and most of the front fascia are damaged.
Some of the a/c components are damaged. The evaporator and lines tied to that are still good, i'll see what else looks in good shape and get back to you.
Yeah my brother has a formula he's been wanting to do a t/a conversion on -- after my wreck he immediately swapped the hatch and took the bumper and some other stuff. Still hasn't paid me yet!!! 
