Weld Wheels/MT Tires, Street Twin, Moser 9", PA Racing K-member, Man Steer rack, etc
10-30-2008, 03:02 PM
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Lincoln, CA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Weld and MT, Moser 9", LT1 race parts, etc. LOTS OF PARTS AND PICS --One pair (two tires) MT ET Fronts 26x4.5-15 (brand new, still have stickers on them, never mounted.) From Summit, $308.65 to your door.
Asking $200 and split shipping. If you are local and pick them up, I will throw in a spare matching tire with approx 2,000 miles on it. Decent tread and good to have a spare.
--One pair (two wheels) Weld Pro Star 15x3.5 1.75" BS with one pair (two tires) MT Sportsman Fronts 26x7.5-15. Tires are nearly worn out. Good for several thousand street miles or many years of drag strip only use. Includes center caps and bolt in metal valve stems. From Summit, $665.55 to your door plus mounting/balancing ~$20-$40.
Asking $350 and split shipping. SOLD
--One pair (two wheels) Weld Pro Star 15x10 7.5" BS with one pair (two tires) MT ET Drags 28x10.5-15(S) (the S stands for a stiffer sidewall recommended for vehicles over 3,000lbs.) Tires are mounted and balanced, rim screwed (8 per side of wheel) and have had one burnout on them, no races. Practically brand new. From Summit, $893.55 plus $11.95 for rim screws, time/labor, mount/balance.
Asking $600 and split shipping.
--One pair (two wheels) Weld Draglite XP 15x8 5" or 5.5" BS with one pair (two tires) MT ET Drags 26x10.0-15. Tires are mounted and balanced, rim screwed (10 per side of wheel) and are mostly worn out. Include Mickey Thompson tubes and rim screws, no center caps. Good for a lower HP car or for a fun burnout. From Summit, $797.55 plus $11.95 for rim screws, time/labor, mount balance and tubes.
Asking $300 and split shipping.
--One pair (two tires) MT ET Streets 28x11.5-15LT. One burnout and about 5 miles of street driving on them. (Drove to a deserted area, did my break in burnout and drove home. Never raced on. From Summit $390.65.
Asking $300 and split shipping. PENDING SALE
--Moser 9"
35 spline axles
pressed in 1/2" wheel studs 2.5" length (enough to be legal with Weld's and McGard shank style lugs)
(axles also drilled and tapped for screw in 1/2" wheel studs
Detroit locker
alluminum center section
billet pinion support
1350 yoke
back brace (welded)
4.30 gears
drain and fill plugs
Wolfe single sway bar welded to rearend already. (you would need to make or buy the 4 small tabs that weld to the body of the vehicle.)
Painted black, approximately 500 miles on rearend, no dragstrip passes. 5 or 6 dyno pulls.
$2,500, including the Wolfe swaybar. (SOLD)
--PA Racing Tubular K-member
Solid motor mount, and pinto style steering rack brackets Chrome-Moly (powdercoat black) (brand new, bolted to engine on engine stand)
$490 retail, asking $390
--PA Racing (Flaming River) manual Pinto Steering Rack with tie rods and steering wheel linkage (brand new, never used)
$490 retail, asking $390
--Spohn tubular LCA’s with heim joints front/rear (powdercoat black) (~4,000 miles)
$275 retail, asking $190
--Spohn tubular PHR with heim joints on both ends (powdercoat black) (~4,000 miles)
$200 retail, asking $140
Dusty but in good condition.
--McLeod Custom Street Twin
I ran a "stock" Street Twin for about 10,000 miles and had McLeod rebuild it (didn't require rebuilding, just preventative for an upgraded motor) with their dual friction setup on both discs. Has alluminum flywheel as well.
$1,150
--Aerospace V-style flanges and clamps 3.5” (2 units) for exhaust fabrication stainless steel) (brand new, still in box)
$125 retail, asking $75
--Moroso LT1 solid motor mounts (Brand new) one side bolted to engine for test clearance.
$62 retail, asking $50 shipped.
-- OEM/NOS Brand new in GM packaging Z-28 emblems (two fender badges, one rear badge with bow-tie, one front bow tie and one nose emblem.)
$144+shipping from several different listings on E-bay, $100 shipped
--Shank style lug nuts for Weld wheels, assortment of Weld, McGard, etc 1/2x20 thread.
$25 plus shipping.
--TPIS "Happy Hooker" LT1 Engine removal plate. Used several times, in good condition.
$40 shipped.
--Autometer Warning/Shift light (red bulb cover and night cover) never used.
$25 shipped.
--SJM low mount LT1 Alt bracket kit New, never used, just bolted to engine for test fitment.
$199 retail, asking $150 shipped.
--Fluidampr for LT1 engine. Used approx 10,000 miles.
$383 retail, asking $250 shipped with ARP 12 point crank bolt.
Brian in Lincoln, CA 95648 (30 minutes outside Sacramento)
(707) 480-7275
BECcruice@gmail.com
Asking $200 and split shipping. If you are local and pick them up, I will throw in a spare matching tire with approx 2,000 miles on it. Decent tread and good to have a spare.
--One pair (two wheels) Weld Pro Star 15x3.5 1.75" BS with one pair (two tires) MT Sportsman Fronts 26x7.5-15. Tires are nearly worn out. Good for several thousand street miles or many years of drag strip only use. Includes center caps and bolt in metal valve stems. From Summit, $665.55 to your door plus mounting/balancing ~$20-$40.
Asking $350 and split shipping. SOLD
--One pair (two wheels) Weld Pro Star 15x10 7.5" BS with one pair (two tires) MT ET Drags 28x10.5-15(S) (the S stands for a stiffer sidewall recommended for vehicles over 3,000lbs.) Tires are mounted and balanced, rim screwed (8 per side of wheel) and have had one burnout on them, no races. Practically brand new. From Summit, $893.55 plus $11.95 for rim screws, time/labor, mount/balance.
Asking $600 and split shipping.
--One pair (two wheels) Weld Draglite XP 15x8 5" or 5.5" BS with one pair (two tires) MT ET Drags 26x10.0-15. Tires are mounted and balanced, rim screwed (10 per side of wheel) and are mostly worn out. Include Mickey Thompson tubes and rim screws, no center caps. Good for a lower HP car or for a fun burnout. From Summit, $797.55 plus $11.95 for rim screws, time/labor, mount balance and tubes.
Asking $300 and split shipping.
--One pair (two tires) MT ET Streets 28x11.5-15LT. One burnout and about 5 miles of street driving on them. (Drove to a deserted area, did my break in burnout and drove home. Never raced on. From Summit $390.65.
Asking $300 and split shipping. PENDING SALE
--Moser 9"
35 spline axles
pressed in 1/2" wheel studs 2.5" length (enough to be legal with Weld's and McGard shank style lugs)
(axles also drilled and tapped for screw in 1/2" wheel studs
Detroit locker
alluminum center section
billet pinion support
1350 yoke
back brace (welded)
4.30 gears
drain and fill plugs
Wolfe single sway bar welded to rearend already. (you would need to make or buy the 4 small tabs that weld to the body of the vehicle.)
Painted black, approximately 500 miles on rearend, no dragstrip passes. 5 or 6 dyno pulls.
$2,500, including the Wolfe swaybar. (SOLD)
--PA Racing Tubular K-member
Solid motor mount, and pinto style steering rack brackets Chrome-Moly (powdercoat black) (brand new, bolted to engine on engine stand)
$490 retail, asking $390
--PA Racing (Flaming River) manual Pinto Steering Rack with tie rods and steering wheel linkage (brand new, never used)
$490 retail, asking $390
--Spohn tubular LCA’s with heim joints front/rear (powdercoat black) (~4,000 miles)
$275 retail, asking $190
--Spohn tubular PHR with heim joints on both ends (powdercoat black) (~4,000 miles)
$200 retail, asking $140
Dusty but in good condition.
--McLeod Custom Street Twin
I ran a "stock" Street Twin for about 10,000 miles and had McLeod rebuild it (didn't require rebuilding, just preventative for an upgraded motor) with their dual friction setup on both discs. Has alluminum flywheel as well.
$1,150
--Aerospace V-style flanges and clamps 3.5” (2 units) for exhaust fabrication stainless steel) (brand new, still in box)
$125 retail, asking $75
--Moroso LT1 solid motor mounts (Brand new) one side bolted to engine for test clearance.
$62 retail, asking $50 shipped.
-- OEM/NOS Brand new in GM packaging Z-28 emblems (two fender badges, one rear badge with bow-tie, one front bow tie and one nose emblem.)
$144+shipping from several different listings on E-bay, $100 shipped
--Shank style lug nuts for Weld wheels, assortment of Weld, McGard, etc 1/2x20 thread.
$25 plus shipping.
--TPIS "Happy Hooker" LT1 Engine removal plate. Used several times, in good condition.
$40 shipped.
--Autometer Warning/Shift light (red bulb cover and night cover) never used.
$25 shipped.
--SJM low mount LT1 Alt bracket kit New, never used, just bolted to engine for test fitment.
$199 retail, asking $150 shipped.
--Fluidampr for LT1 engine. Used approx 10,000 miles.
$383 retail, asking $250 shipped with ARP 12 point crank bolt.
Brian in Lincoln, CA 95648 (30 minutes outside Sacramento)
(707) 480-7275
BECcruice@gmail.com
Last edited by WHYT LIE; 11-21-2008 at 04:27 PM. Reason: Consolidating ads.
11-14-2008, 05:13 PM
#3
11-14-2008, 05:31 PM
#4
Your pics arent working.Can i get some pics of the rear prostars? Do you have pics of them mounted? dj317@hotmail.com
11-14-2008, 07:17 PM
#6
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Lincoln, CA
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
can you send me pictures of the front weld's to camaro2you@msn.com. thanks
Originally Posted by Jonez_z
Your pics arent working.Can i get some pics of the rear prostars? Do you have pics of them mounted? dj317@hotmail.com
Originally Posted by CATCHMYZ
So how many miles on the mcleod twin disk since the rebuild ?
