Parting Out 93Z
#1
Parting Out 93Z
I have a 93Z and we found out today that the frame has some damage to the back side. On that note, I will be looking to part this one out if there is enough interest. The car is an A4, 3.23 rear, and 140K miles on it. Motor runs good but I was int he process of restoring car when we discovered the hidden damage. alot of little items are already coated
There are no performance parts....all stock stuff. I am having a minor rebuild on the 700R4 also. Clutches look good, new pump, seals, etc.
No PMs right now, just keep it in here as it is easier to track who wants what.
Car is about 95% complete. Exterior is patriot red and the interior is gray.
Let me know and I will change this original post witht he parts and prices as per board rules. Want to use the money for a new ride so help me out guys
Thanks!
Mike
There are no performance parts....all stock stuff. I am having a minor rebuild on the 700R4 also. Clutches look good, new pump, seals, etc.
No PMs right now, just keep it in here as it is easier to track who wants what.
Car is about 95% complete. Exterior is patriot red and the interior is gray.
Let me know and I will change this original post witht he parts and prices as per board rules. Want to use the money for a new ride so help me out guys
Thanks!
Mike
Last edited by GEARHED; 03-01-2009 at 01:53 PM.
#4
Interested in the rear disk brakes - calipers, rotors, mounting plates, lines, cables, bolts, brackets - everything. Trying to change over to disks that mount behind the axle so basically need everything (but I don't need the rear axle itself).
#5
I decided to part it out tonight....I will get everyone prices tomorrow afternoon after I run my errands.
Dan, sorry no CD player.
Harness and ECU are non molested and in good shape.
At this time I will sell the rear only as a whole unit and once I am done parting out the car...I need to be able to roll it around still.
Will post a list of everything soon!
Thanks for your patience!
Mike
Dan, sorry no CD player.
Harness and ECU are non molested and in good shape.
At this time I will sell the rear only as a whole unit and once I am done parting out the car...I need to be able to roll it around still.
Will post a list of everything soon!
Thanks for your patience!
Mike
Trending Topics
#9
Fenders $50 each
Doors (Manual windows and locks-drivers side door lock does not work for some reason) $80 each
Rear hatch $80
Front nose cover (has a couple of cracks) $40
Hood $65
Set of the gray and black cloth seats (drivers front has rips in the lumbar area)..rest are in good shape $100
door panels $70/pair
rear inner panels by seats (gray) $35/pair
rear hatch plastic panel $10
console (no lid) decent shape $45
A4 shifter $30
lower dash pad $110
gray seatbelts $80/set
hood latches $10/pair
hood struts $15/pair
hatch struts $15/pair
Computer and engine harness $115/both
LT1 longblock (no accessories-just complete block and heads) $400
LT1 intake (powdercoated silver vein) (ON EBAY NOW)
LT1 fuel rails (ON EBAY - goes with intake)
opti $30
accessory brakcet $15
power steering pump with reservoir (no lines) $30
rear hatch/trunk carpet $20
airbags $25/each
wiper motor $20
cowl plastic $15
stock injectors $20 (ON EBAY - GOES WITH INTAKE AND RAILS)
throttle body with $15 worth of brand new gaskets $35
stock air box assembly $20
misc brackets, lights, etc. make offer
drivers side tail light $25 ( ON EBAY NOW)
rear bumper cover (been bumped) $20
camaro tail light panel $35
My 700r4 will be coming back from the shop, clutches/bands look reat, new pump, gaskets, and filters installed $350
gas tank $45
stock fuel pump $25
radiator $45
dual fans $45
transmission lines $10
steel driveshaft $20
rear hatch plastic $30
Post up for something you need...never parted a fourth gen so my prices are not firm in stone. I have these items posted locally too. large items I do not prefer to ship but if you need it, I will consider it.
Once the car is parted out I will sell what is left of the shell, 3.23 posi rear, and the salad shooter rims and good tires. Would make a great backhalf drag car with a good FL title.
Thanks!
Mike
Doors (Manual windows and locks-drivers side door lock does not work for some reason) $80 each
Rear hatch $80
Front nose cover (has a couple of cracks) $40
Hood $65
Set of the gray and black cloth seats (drivers front has rips in the lumbar area)..rest are in good shape $100
door panels $70/pair
rear inner panels by seats (gray) $35/pair
rear hatch plastic panel $10
console (no lid) decent shape $45
A4 shifter $30
lower dash pad $110
gray seatbelts $80/set
hood latches $10/pair
hood struts $15/pair
hatch struts $15/pair
Computer and engine harness $115/both
LT1 longblock (no accessories-just complete block and heads) $400
LT1 intake (powdercoated silver vein) (ON EBAY NOW)
LT1 fuel rails (ON EBAY - goes with intake)
opti $30
accessory brakcet $15
power steering pump with reservoir (no lines) $30
rear hatch/trunk carpet $20
airbags $25/each
wiper motor $20
cowl plastic $15
stock injectors $20 (ON EBAY - GOES WITH INTAKE AND RAILS)
throttle body with $15 worth of brand new gaskets $35
stock air box assembly $20
misc brackets, lights, etc. make offer
drivers side tail light $25 ( ON EBAY NOW)
rear bumper cover (been bumped) $20
camaro tail light panel $35
My 700r4 will be coming back from the shop, clutches/bands look reat, new pump, gaskets, and filters installed $350
gas tank $45
stock fuel pump $25
radiator $45
dual fans $45
transmission lines $10
steel driveshaft $20
rear hatch plastic $30
Post up for something you need...never parted a fourth gen so my prices are not firm in stone. I have these items posted locally too. large items I do not prefer to ship but if you need it, I will consider it.
Once the car is parted out I will sell what is left of the shell, 3.23 posi rear, and the salad shooter rims and good tires. Would make a great backhalf drag car with a good FL title.
Thanks!
Mike
Last edited by mikes98z; 03-06-2009 at 06:14 AM. Reason: PRICES REDUCED - MAKE OFFER
#12
give me a day to figure cost to ship the transmission.
I will sell the motor without the heads and intake. I would like to leave the cam in it and let you swap if that is ok. Just dont have time to take it apart. PM me and we can discuss.
Thanks!
Mike
I will sell the motor without the heads and intake. I would like to leave the cam in it and let you swap if that is ok. Just dont have time to take it apart. PM me and we can discuss.
Thanks!
Mike
#14
Adamj1982....the opti is the one that was ont he car when I bought it. I do not know if it has 140K on it or not. I have owned cars with less miles that had them replaced. It worked fine when I parked it and started working on the car.
I have the inspection cover for the 700R4.....$10 plus shipping for it.
Thanks!
I have the inspection cover for the 700R4.....$10 plus shipping for it.
Thanks!