Here we go..lets get some stuff out of the way....I am parting the car out to make room for a new project. I have enjoyed the car for many years, and i am ready for something new! I will not be accepting any trades. If you are purchasing couple of items, we can work out a better deal. All prices are + actuall shipping. Please do not waste my time by asking for pictures of items if you have no intentions of buying the parts. All questions will be answeared as soon as i can. I will take few videos of the car this weekend when i go for the final drive. Car makes no weird noises, does not leak or burn any oil, and is a joy to drive. If someone wants to make me an offer on the whole car please dont hesitate. Anyhow, that should cover most of it...here is the list, which by no means is complete. Car made 700rwhp before a smaller pully/bigger intake pipe/true duals etc...all on 93 pump gas.

All parts will be avilable to be shipped next monday. i know i made this thread before...but this time it is for REAL

HERE WE GO:

Edelbrock Intake LT4 (RED)
AFR 227 LT4 HEADS Ported by Lloyed (springs good up to 650 lift)
Jassel Comp Shaft mounted Rockers 1.6
Heads flow
.2 138/103
.3 206/139
.4 255/173
.5 293/198
.6 308/210
.7 313/229
.8 314/237

Do not want to sell it sepertatly as it is all ment to work together, it is top of the line stuff.
SOLD
Nothing wrong with any of it...less then 5k on all of it.

Custom Cam by Pro Line Racing (forced induction cam)
Duration @ .050" 236/242
Lift .572/.576 (1.65/1.6)
Lobe Sep. 115
Advance +4
SOLD

Morel Hyrdolic Lifters with end bars
SOLD

ATI ProCharger D1 Custom Kit 12 rib
ATI D1 Supercharger (5k or so since been serviced)
Custom Intercooler
SDCE Tensioner
3 pullys 3.4, 3.7, and 4.25
HARD 4inch custom Inlet pipe for the blower
gigantic filter, all hoses/pipes connected with T-bolt Clamps
ATI RACE BYPASS VALVE
ATI FLUID DAMPER
SOLD





Alkycontrol Methanol Kit

comes with everything as you would get it from AlkyCOntrol
SOLD

Moser 12 bolt Rear End
3.73 Gear
HD Posi
3 channel ABS
1350 Yoke
Heavy Duty Cover
SOLD

Lingenfelter driveshaft 3.5inches
aluminum, shortned, balanced, 1350 end for the 12 bolt
SOLD

T56 Transmission
stock, works 100% perfectly, less then 100k, does NOT pop out of reverse, never ran with slicks, smooth shifts etc etc.
$1200

Pro 5.0 Shifter + 03 Cobra ****
custom short stick with a 03 Cobra ****
$200

Mcleod Street Twin clutch with Aluminum Flywheel
Less then 500 miles since a rebuilt! comes with the adjustable master cylinder.
SOLD


BMR Adjustable Torque Arm
Black
spoken for

Hooker LongTube 1 3/4 headers (uncoated but not rusty)
the flange has been cut off so they are slip on (will include the old flange if needed)
$300

3inch True Dual Mandrel Bent exhaust
xpipe, 3 inch Magnaflow mufflers with nice turndowns
$500

Fully Forged Top of the line SHORTBLOCK to handle all the boost
put toghter by Pro Line Racing
3.75 Callies Dragon Slayer Crank
6.0 Oliver Forged Rods
Custom Blower -31cc Diamond Pistons
Hellfire Rings
(callies) 4 bolt mains
Canton Oil pan
coated clevite bearings throughout
less then 5k...does not burn any oil
SOLD

Fikse FM5 Wheels
Polished 17x9.5 front with some Kumohs
17x11 Rear with nittos drag radials
they are not perfect, had some curbrash that i have fixed, you can hardly see it.
$2500

RaceTronix Dual Intank Walbro KIT
Complete kit and wiring harness, hobbs switch etc etc
SOLD

Holly 96lb low impedance Injetors
Like new less then 3k
SOLD

VersaFueler Impedance Covertere Box
$SOLD for additional 100 i can include a M6 OBD I engine/tranny harness so you dont have to splice anything in.

Valve Covers
2 sets..one polished, one black
Pro Form PRO-141-130
$75

CSI Electric Water Pump for LT1
SOLD

ASM 58mm Throtle Body
$375

Vented Opti AD DELCO
Less then 5k
$250 + 35 for a pretty much new harness

ARP HEAD STUDS 12 point
ARP 234-4301
SOLD

 

 

Ahh you're actually going to sell it this time? Sick car, I wanted your D1 kit back when but you decided otherwise at the time.

Good luck with the sale...bump.

 

Wil you negotiate on the wheels? Will you sell them without the tires?

 

they come with tires....nittos are goin to be pretty much done and the front ones have about 30-40% left. email me @ marcinwz@Gmail.com and we can talk.

 

Got pics of the torque arm? Is it a tunnel mount or full length? Do you have the bushing for it? And does it come with the hardware?

 

it's a full lenght, bushing comes with it..pic is posted...look little harder

 

How much use on the csi water pump? with or without housing and wiring?

 

Pics of valve covers?

 

right aroudn 5k...ill throw in the housing/harness for 50 more

 

look at the pics posted for now....ill take some more pics this weekend.

 

you've been pm'd

 

HAHA! I see it now. I guess when I saw it last night I assumed it was just a pic of the driveshaft and something random you had in the pic. How much would shipping be to 88101 for that driveshaft? Oh and also does it come with the hardware or pinion angle finder?

 

260 shipped for the DS and ill throw in the pinion angle finder

 

I must be sick! I have been feeling bad the last few days. Anyway what I meant to say was how much shipped for the TORQUE ARM? I am an idiot.

 

sorry alreadys spoken for

 

Trade ya a motorcycle for the lt4 intake and heads

 

sorry..not looking for any trades

 

come on guys...buy buy buy

 

How is the Flywheel balanced?