Harris Speedworks Wet Kit
05-06-2008, 11:24 AM
#1
Self proclaimed VILLAGE IDIOT
Thread Starter
iTrader: (5)
Join Date: Jul 2007
Location: Alpharetta, GA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Harris Speedworks Wet Kit Harris Speedworks nitrous wet kit. Comes with upgraded solenoids able to support a 200 shot. Only one 10 pound bottle has been used with this kit. I had no problems with this kit and I'm selling because I'd like to do more appearance mods to my truck. The kit is already assembled, just needs to be hooked up to an electrical source and mounted. Currently setup for a 125 shot.
Kit includes:
-10 LB Nitrous Bottle.
-2 Quick Disconnect Bottle Brackets.
-PowerMax 2-Port N20 Solenoid
-PowerMax 2-Port Fuel Solenoid
-Nozzle Retaining Nut
-4AN Bottle Nut
-15" (Inches) Blue Braided Stainless Hose (Solenoid to Nozzle)
-15" (Inches) Red Braided Stainless Hose (Solenoid to Nozzle)
-20" (Inches) Red Braided Stainless Hose (Fuel Rail to Solenoid)
-16' (Feet) 4AN Stainless Braided Hose (Main Feed Line)
-2 Blue AN to NPT Fittings
-2 Red AN to NPT Fittings
-WOT Micro Activation Switch and Bracket
-Arming Switch
-40 Amp Relay & Harness
-HSW Nitrous Pressure Gauge (Mounts on Nitrous Bottle)
-Set of Solenoid Brackets (Hardware Included)
-15' (Feet) of electrical wiring and connectors
I do have the pre-mix nozzle but it broke during installation and I haven't gotten around to getting a new one. However, the kit will work without the nozzle and I have been told it's more effective without the fuel and the N20 being pre-mixed. Instructions on how to install this will be included or I can order a new nozzle per buyer's request.
PM for pictures or any specific questions.
NEW PRICE: $175 + SHIPPING!
Kit includes:
-10 LB Nitrous Bottle.
-2 Quick Disconnect Bottle Brackets.
-PowerMax 2-Port N20 Solenoid
-PowerMax 2-Port Fuel Solenoid
-Nozzle Retaining Nut
-4AN Bottle Nut
-15" (Inches) Blue Braided Stainless Hose (Solenoid to Nozzle)
-15" (Inches) Red Braided Stainless Hose (Solenoid to Nozzle)
-20" (Inches) Red Braided Stainless Hose (Fuel Rail to Solenoid)
-16' (Feet) 4AN Stainless Braided Hose (Main Feed Line)
-2 Blue AN to NPT Fittings
-2 Red AN to NPT Fittings
-WOT Micro Activation Switch and Bracket
-Arming Switch
-40 Amp Relay & Harness
-HSW Nitrous Pressure Gauge (Mounts on Nitrous Bottle)
-Set of Solenoid Brackets (Hardware Included)
-15' (Feet) of electrical wiring and connectors
I do have the pre-mix nozzle but it broke during installation and I haven't gotten around to getting a new one. However, the kit will work without the nozzle and I have been told it's more effective without the fuel and the N20 being pre-mixed. Instructions on how to install this will be included or I can order a new nozzle per buyer's request.
PM for pictures or any specific questions.
NEW PRICE: $175 + SHIPPING!
05-06-2008, 01:58 PM
#5
TECH Apprentice
iTrader: (13)
Join Date: Dec 2007
Location: Williamsport, MD
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
I am very interested. I have the money and am looking to buy asap. This will work on my LS1 right?? PM some info and pics and if I like it I will send you the money today.
05-06-2008, 02:15 PM
#6
Self proclaimed VILLAGE IDIOT
Thread Starter
iTrader: (5)
Join Date: Jul 2007
Location: Alpharetta, GA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
This kit will pretty much work on any vehicle equipped with an intake tube...
I'll PM pictures within the next hour. Any specific pictures that you would like to see?
I'll PM pictures within the next hour. Any specific pictures that you would like to see?
05-06-2008, 02:16 PM
#7
Self proclaimed VILLAGE IDIOT
Thread Starter
iTrader: (5)
Join Date: Jul 2007
Location: Alpharetta, GA
Posts: 816
Likes: 0
Received 0 Likes
on
0 Posts
Here's the exact kit albeit the nitrous and fuel jets. Jets for a 125 shot are currently installed.
http://www.harrisspeedworks.com/shop...cat=364&page=1
http://www.harrisspeedworks.com/shop...cat=364&page=1
