LT4 Vavletrain
05-19-2008, 06:48 PM
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Jul 2004
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
LT4 Vavletrain Moving on to bigger and better setup. So Im selling my old setup here.
This setup ran a best of 7.28 N/A at 94.1 MPH with a turbo 350 and 7.8 N/A with a 6-speed and 7.48 on a 50 shot.
part out prices added.. prices are for the part only. or you can buy all for 2400+shipping and PP fees
What you get
58 MM BBk TB $200
30LB accel injectors $250
Fuel rails and adj. fuel regulator $80
All part below came from Flowtenics in WA.
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates
Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213
I have over 4 grand in this setup.... 1st 2400 takes the complete setup. The heads and cam are still on the car till new setup get here or I will pull them when sold
I will give the person that buys it a copy of the tune.
I will throw in LT1 edit for 300.
If you have any questions my number is 325-864-1653
This setup ran a best of 7.28 N/A at 94.1 MPH with a turbo 350 and 7.8 N/A with a 6-speed and 7.48 on a 50 shot.
part out prices added.. prices are for the part only. or you can buy all for 2400+shipping and PP fees
What you get
58 MM BBk TB $200
30LB accel injectors $250
Fuel rails and adj. fuel regulator $80
All part below came from Flowtenics in WA.
LT4 intake port matched for heads and TB. Intake has had some port work don to it. $400
Custon grind hydro roller cam, lifter and harded pushrods used with cam spec below $350
Intake 236@.050; 344 lobe rise w/1.6 r.r. .550 Lift
Exhuast 245@.050; .358 lobe risew/1.6 r.r. 573 Lift
LT4 heads that have been ported and polshed $1500
Specs are
2.02 intake and 1.60 exhuast vavle
59cc; bronze guides, hardened spring pads and valve gudies plates
Flow numbers are
Lift Intake Exhuast
.300 192 162
.400 225 187
.500 259 203
.550 276 208
.600 283 213
I have over 4 grand in this setup.... 1st 2400 takes the complete setup. The heads and cam are still on the car till new setup get here or I will pull them when sold
I will give the person that buys it a copy of the tune.
I will throw in LT1 edit for 300.
If you have any questions my number is 325-864-1653
Last edited by bandit383; 05-22-2008 at 09:03 PM.
tor Trending Topics
06-28-2008, 02:51 AM
#18
Staging Lane
Join Date: Dec 2005
Location: Syracuse, UT
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts