Strong 383 small block Race ready
#1
On The Tree
Thread Starter
iTrader: (11)
Join Date: Nov 2006
Location: currituck,nc
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I Have a good friend of mine thats selling his freshened-up 383 stroker motor. The only reason that he's selling the motor is becasue he's putting a 427 SB in the car. He's located in currituck NC
Here the specs:
Nickel Cad Block
4 Bolt Billet Main Caps
Eagle Rotating Assembly
Forged Crank
6in. h-Beam Rods
Dish Piston
New Rings/Bearings
Comp Cam/solid Tappet Roller
Comp Roller Lifters Cam part#12-771-8
Gross lift 1.5 Rocker Int.-.570/ Ehh.-.576
Gross lift 1.6 Rocker Int.-.608/ Exh.-.614
Duration .015 Tappet Lift Int.280/ Exh. 286
Duration .050 Int. -242/ Exh. -248
Cam Intalled 106 Int. Center line
Lobe separation 110
$3500
Heads Extra
Chevy Heads Cast #491
202 Int. Valves 160 Exh. Spring Set-up For Solid Tappet Roller
64 cc Chambers Straight Plug
Motor with heads 9:75:1 Compression Pump Gas
Sold with motor $750 (separate)$900
Before The Motor was Freshened up it was in a 66 Nova, that weighs 3500lbs with a turbo 350 tranny, 12 bolt with 3:73's, 3400-rpm stall
1/8 mile ran 7.4 N/A
1/8 mile ran 6.7 with 150 wet shot NOS Nitrous
1/4 mile ran 11.80 N/A
1/4 mile ran 10.7 with 150 wet shot NOS Nitrous
Contact info: Glennew57@mchsi.com
here are some picts of the car
![](http://i188.photobucket.com/albums/z253/suprsiz3_ls1/Camaro-Z28/glen7.jpg)
Here the specs:
Nickel Cad Block
4 Bolt Billet Main Caps
Eagle Rotating Assembly
Forged Crank
6in. h-Beam Rods
Dish Piston
New Rings/Bearings
Comp Cam/solid Tappet Roller
Comp Roller Lifters Cam part#12-771-8
Gross lift 1.5 Rocker Int.-.570/ Ehh.-.576
Gross lift 1.6 Rocker Int.-.608/ Exh.-.614
Duration .015 Tappet Lift Int.280/ Exh. 286
Duration .050 Int. -242/ Exh. -248
Cam Intalled 106 Int. Center line
Lobe separation 110
$3500
Heads Extra
Chevy Heads Cast #491
202 Int. Valves 160 Exh. Spring Set-up For Solid Tappet Roller
64 cc Chambers Straight Plug
Motor with heads 9:75:1 Compression Pump Gas
Sold with motor $750 (separate)$900
Before The Motor was Freshened up it was in a 66 Nova, that weighs 3500lbs with a turbo 350 tranny, 12 bolt with 3:73's, 3400-rpm stall
1/8 mile ran 7.4 N/A
1/8 mile ran 6.7 with 150 wet shot NOS Nitrous
1/4 mile ran 11.80 N/A
1/4 mile ran 10.7 with 150 wet shot NOS Nitrous
Contact info: Glennew57@mchsi.com
here are some picts of the car
![](http://i188.photobucket.com/albums/z253/suprsiz3_ls1/Camaro-Z28/glen7.jpg)
![](http://i188.photobucket.com/albums/z253/suprsiz3_ls1/Camaro-Z28/glen5.jpg)