Orygun guys?
06-10-2010, 11:53 AM
#3483
Staging Lane
iTrader: (4)
Join Date: Jun 2006
Location: Oregon
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
I would be down. People can pitch tints in my back yard to save on hotels or camping fees etc. I know Honeyman State Park back on H loop I think gets booked fast in the summer since you can ride your quad out from the camp site. I could go early saturday or sun but would have to call it a day around noon since I work nights and would need to sleep.
06-10-2010, 12:05 PM
#3484
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
i would like to do the monthley dinner thing, i had fun last night. as far as riding gos, i havent owned a dirtbike in quite a few years, i would like to get one once i get a job though and then i would be down for some riding
06-10-2010, 12:32 PM
#3486
Yea my clutch is doing the stick to the floor thing after hard runs, found that out at the track, while normal street driving it is totally fine, it is after high RPM shifts in a couple gears. I have not bleed the fluid, I changed it at the top before going to the track and it was pretty dirty, this was the second time I had done that. I think I will start with the drill mod and see if that helps.
I have a few friends that ride quite a bit, one of them is on here but doesnt get on very often.
06-10-2010, 12:47 PM
#3489
TECH Regular
iTrader: (3)
Join Date: Sep 2004
Location: Vancouver, Washington
Posts: 433
Likes: 0
Received 0 Likes
on
0 Posts
When I lived in SE Idaho, we did this exact same thing while I was a part of the Utah F-Body Association. But we only did the dinner get togethers during the winter months, whereas we had organized summer schedule with other activities such as drags, cruises, car shows, etc. We did Wednesday nights at 7 pm and the location changed from North (Ogden area), Central (Bountiful/North SLC), and South (Sandy/American Fork area). This can/does work.
06-10-2010, 12:55 PM
#3490
The dinner thing would be fun I think.
06-10-2010, 01:41 PM
#3491
TECH Enthusiast
iTrader: (4)
Join Date: Aug 2009
Location: longview, wa
Posts: 651
Likes: 0
Received 0 Likes
on
0 Posts
ive been weanting one for a long time. i am in school and im attending summer quarter, i have a basic safety class for my mariner credential in august so i hope to be to work by fall. if so i wana buy a used YZ250 2 stroke.
06-10-2010, 04:41 PM
#3497
TECH Apprentice
iTrader: (6)
Join Date: Oct 2007
Location: Newberg Oregon
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I have an older YZ250 with all the good stuff, FMF pipe, Pro Circuit silencer, brand new v-force reeds, spare paddle. just don't ride it much any more. It needs some plastics, the ones on it are off of a 94 and they are hard to find blue ones that match. $800
