Looking for TBI 350.....
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My girlfriends brother has a '90 chev 1/2 ton 4x4 pick up that he just forced to sink a ton of cash into a new rear end and trans but the motor is on the way out the door next. He is going through a quart of oil at every fill up. Motor runs strong but needs new rings from the sound of it. He cant afford to have the car down for more than a weekend so he figured he would just try to find a crate engine to drop in it.
Right now he has only sourced NAPA and SCHMUCKS for a motor and I am trying to steer him clear of those places. Do any of you have any lines on a good 350 that would work in this truck?
Thanks
Right now he has only sourced NAPA and SCHMUCKS for a motor and I am trying to steer him clear of those places. Do any of you have any lines on a good 350 that would work in this truck?
Thanks
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
GM Goodwrench Target motor from sponsor SDPC.
http://www.sdparts.com/catalog/crate...ngineKits.aspx
ENGTL05GW
![](http://www.sdparts.com/images/design/spacer.gif)
Part #
12568758
Price: $1,769.00
Quantity:
![](http://www.sdparts.com/images/buttons/emailafriend.gif)
1987-92 Chevrolet, GM C G1,2,3 (L05)(5.7K) M D 8
1987 Chevrolet, GM C RV1, 2 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1988 Chevrolet, GM C CK1, 2 (L05)(5.7K)
1988-91 Chevrolet, GM C RV1 (L05)(5.7K)
1989-95 Chevrolet, GM C CK 1, 2 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1993-94 Chevrolet, GM C G1,2,3 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1995 Chevrolet, GM C G2,3 (L05)(5.7K) M30 Emis. Sys (under 8500lb. GVW) NA1
Every new Goodwrench engine is made to the same engineering standards that go into every new GM vehicle. They’re tested to perform under the most demanding conditions, assuring you the reliability and quality you expect from the Goodwrench name and they’re backed by a 36-month/100,000 mile transferable limited warranty. GM Service Replacement Engines are available at over 7,200 GM Dealers across the U.S. and Canada.
Replaces: 12520268
http://www.sdparts.com/catalog/crate...ngineKits.aspx
![](http://www.sdparts.com/images/products/detail/12568758_detail.jpg)
ENGTL05GW
![](http://www.sdparts.com/images/design/spacer.gif)
Part #
12568758
Price: $1,769.00
Quantity:
![](http://www.sdparts.com/images/buttons/emailafriend.gif)
1987-92 Chevrolet, GM C G1,2,3 (L05)(5.7K) M D 8
1987 Chevrolet, GM C RV1, 2 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1988 Chevrolet, GM C CK1, 2 (L05)(5.7K)
1988-91 Chevrolet, GM C RV1 (L05)(5.7K)
1989-95 Chevrolet, GM C CK 1, 2 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1993-94 Chevrolet, GM C G1,2,3 (L05)(5.7K) Emis. Sys (under 8500lb. GVW) NA 1
1995 Chevrolet, GM C G2,3 (L05)(5.7K) M30 Emis. Sys (under 8500lb. GVW) NA1
Every new Goodwrench engine is made to the same engineering standards that go into every new GM vehicle. They’re tested to perform under the most demanding conditions, assuring you the reliability and quality you expect from the Goodwrench name and they’re backed by a 36-month/100,000 mile transferable limited warranty. GM Service Replacement Engines are available at over 7,200 GM Dealers across the U.S. and Canada.
Replaces: 12520268
Last edited by NWDragRacer; 04-30-2008 at 12:04 PM. Reason: found better fit
#4
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yeah, sorry - wrong link
Here's the right one
http://www.sdparts.com/product/12568...GRUL0557K.aspx
That's what they were designed for. TRUE bole in.
#7
Banned
iTrader: (54)
Join Date: Nov 2001
Location: Grants Pass, OR
Posts: 1,816
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I can get you as good if not better price from GM and you don't have shipping charges through GM. You could also get a roller cam'd vortec headed motor for $2200 or so and get a vortec manifold and would be a little nicer motor.
I'm going through the same thing right now with my brother's truck. For mine I swapped in a 6.0L
I'm going through the same thing right now with my brother's truck. For mine I swapped in a 6.0L
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Trending Topics
#10
LS1TECH & Trucks Sponsor
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I can get you as good if not better price from GM and you don't have shipping charges through GM. You could also get a roller cam'd vortec headed motor for $2200 or so and get a vortec manifold and would be a little nicer motor.
I'm going through the same thing right now with my brother's truck. For mine I swapped in a 6.0L![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
I'm going through the same thing right now with my brother's truck. For mine I swapped in a 6.0L
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Scoggin Dickey was great to deal with and the parts arrived on time and in great condition. LS6 and quite a few odds and ends. I would also recommend them to anyone that needs GM parts.
#14
LS1TECH & Trucks Sponsor
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks for the kind words guys
It's appreciated and I'm glad to see a few more happy customers passing the word along.
You would be surprised ![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You know we'll be glad to get you set up.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
You know we'll be glad to get you set up.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
![](https://ls1tech.com/forums/signaturepics/sigpic3451_2.gif)
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice