for those who have problems getting it off because you sprayed a light coat.. goo gone takes it right off.

 

I did the inside barrel of my winter wheels.. may try to strip the faces polish them up some then spray the dupli-color shadow on it to see how much it will look like black chrome. The wheels are just factory 97 to 00 16" camaro wheels.

 

i cant get a nice line the paint wants to come off with the tape did like 3 coats

 

You have to peel the tape off right after spraying last coat, while it's still wet.

 

I did my hood, and it turned out pretty good, 3 coats, and laid down well, can't see any spray lines. http://www.flickr.com/photos/27889048@N04/6588705629

 

dont u have 2 let it dry a little each coat i tryd taken tape off right after the last coat was still weet but its the 1st and 2nd coat that gets it and each coat i only let it dry like 2 to 3 min

 

For plasti dip, I think it's best to lay the first layer to be as wet as possible without running. Then light coats afterwards.

I did my stock snowflake wheels but I was rushed and it still looks okay IMO.

 

Damn, I really like that hood! What kind is that?

 

How much does a can usually run for?

 

And how many cans to do a full set of wheels?

 

I bought it for about $5 a can at homedepot and it took me 2 cans.

 

still cant get a good clean line

 

Thanks.

 

I think there should be a general rule on having black cars that are not lowered. If your car isnt lowered then dont paint your wheels black. Im no opinion it never looks good, from f bodys to my buds c6.

 

anybody every done the screaming chicken on a TA hood with plasti dip?

 

Did the bumpers and corner of the lights! love the way it came out

 

did my girls bmw kidney grilles before spending the money for black ones
before

testing

she said yes

 

Has anyone ever sprayed it on the windows, I was thinking of getting some to use to "black out" my T-tops for the upcoming summer months?

Also has anyone tried laying a coat or 3 over the rubber window seals to see if that would thicken up the seals enough to stop the ones with small leaks?

 

[IMG][/IMG]

1 can ceta mod

 

I am about to try out the red on a few parts as soon as I find some.....