Procharger Kit, FMIC, Complete 8-rib SDCE Tensioner Kit, all the upgrades!
#1
Procharger Kit, FMIC, Complete 8-rib SDCE Tensioner Kit, all the upgrades!
Category: Engine - Power Adders
Price: $3000
Part Fits: 93-02 Chevrolet Camaro
Location (State): OK
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
Do not insult me with a low offer please and no trades.
I take paypal.
This kit is far superior to the 8-rib 1GJ204-SCI D1SC Kit Procharger sells for $6495 MSRP ($5999 is best deal I've seen it listed at anywhere) which doesn't have a FMIC, tensioner 8-rib setup or upgraded air inlet. This would work great on a low boost 8-10psi setup as well as a 18-20 psi race setup. Buy this and then buy your own procharger for a easy procharger install!
I was going to use this complete setup on my 00 WS6...
This is an ideal setup and far superior to a standard Procharger kit in every way with the upgrades. Whole setup was mocked up on a 00 SS camaro before I got it.
**No procharger included or blower pulley**
-New 8-rib Procharger Crank Pulley
-Brand New Complete Procharger Single Fan Assembly(Not shown in picture but can get one if needed)
-SDCE 8-Rib Billet Aluminum Crank Pulley Setup /w Adapter to use with your factory harmonic balancer (non ATI balancer) (Not shown in picture but can get one if needed)
-New Custom Air inlet pipe setup which gives no restriction like the factory Procharger air inlet.
-New $800 - Complete front mount intercooler setup with powdercoated black piping, 4" Core big Intercooler, Top quality Turbohoses Couplers, 90 deg reducer hose to throttle body ($300 alone from turbohoses, best stuff out). It has never had any type of air through it. Just mounted up for fitment.
-New Procharger Proflow Bypass valve /w custom screen cover
- 8-rib SDCE Tensioner Setup /w upgraded Steel J-bracket (this setup was $800 upgrade alone). Most SDCE setups, you send them your aluminum j-bracket and they modify it. This one uses a upgraded Steel J-bracket for no worry of bracket flex. You can run 18-20 psi with NO belt slip if you wanted.
- Radiator support bracket top plate - black - Replaces your air box so you don't have to leave old lower air box piece installed to hold radiator/condenser in place.
- Only thing that doesn't come with it is a belt! I would provide one but I haven't measured for it yet, you can just get one at any NAPA. (I recommend NAPA 8-rib belts).
This kit would be completely 100% new unused, but I have mocked up all the parts on the car and everything fit perfect. There are a few small marks on the piping just from handling and putting it all together, but all in all its all BRAND NEW, never seen any air through them.
Last edited by SteelmanLS1; 04-18-2010 at 06:51 PM.
#3
Trending Topics
#9
#11