Greg@RET

iTrader: (3)

Category: Accessories
Price: $100
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

I was building a single turbo street camaro but decided to part it out. I am taking my race car to the next level and need to focus just on one project. Everything is brand new condition. All pictures of everything can be found in this build thread... https://ls1tech.com/forums/forced-in...rbo-build.html
If I list something and you dont see a picture let me know.

$12kIt will be a complete roller, meaning it will not have a motor, a transmission, fuel system, gauges, or fans/radiator. Roll cage and interior will be in the roller. The midwest fab9 with 3.90 gears cost $4k, I have a easy $6k in suspension, $2k in wheels/tires, $2k for the rollcage/coated, $2k in paint, chassis with the LS front end $3k, brakes/lines/fittings, LS steering rack/pump $1k. Dynamatt new carpet etc.. $1k


$6k shippedSingle 76mm Precision turbo, 4" thick a/a intercooler, v band all the way around, turbo blanket, oil feeds/drain lines, aluminum cold side, stainless hot side, Tial wastegate/BOV, 12" air filter, all couplers/clamps, threaded IAT sensor, custom muffler, I will even throw in new exhaust wrap. This kit will come 100% complete with no wait time. You do have to clock the radiator forward with this kit but you can run a/c and power steering.


$2kThis is a brand new never ran or bolted up Mikes TH400 for a LS Motor. This will hold 800 hp all day, transbrake and RMVB. Comes with the SFI bellhousing, flexplate, locking dipstick, even trans oil. I also have a brand new Trans cooler for $200, and a continental brand new convertor $800. Trans has warranty from Mikes Transmission.



$1200I am selling my complete return fuel system for Fbody. Comes with all fuel lines, twin Walbro fuel pumps, filters, Fore regulator, FP gauge, Fast fuel rails, and sumped fuel tank. SOLD TO CHRIS shipped, minus the tank going out today.

$4k This is a complete longblock sealed cover to pan. Shortblock has new ls6 pistons and rods with ARP bolts, and a Lunati billet cam. Heads are ported, 2" intake valves, and 1.55 ex valves. Comes complete ready to drop in. I will find out for sure but I think the compression is 10:1


$600 New Griffin radiator and fans with -20 fittings welded on radiator.

$250 Shipped New LS7 throttle body

$100 shipped New power steering pump, res., and pulley SOLD TO RICK SHIPPED

$150 shipped New coil relocation kit. Add $50 if you want wires

$125 Shipped New truck coils with harness

$200 shipped New LS7 AC compressor

$120 shipped New head cooling/steam vent (-4 lines/block by intake) SOLD TO STEPHAN SHIPPED

$60 shipped New 2 bar Cobalt map sensor

$200 shipped New B&M trans cooler

$300 shipped New 63# shorty fuel injectors

$700 shipped New GMPP LS3 Controller kit

$250 shipped New Chevy valve covers they have -12 fittings welded on them.

$300 Shipped New shorty 63# fuel injectors

$800 shipped Digital gauge cluster set up. Tach/Speed, fuel level, oil press., engine temp, trans temp. Everything new and will come with the cluster we made for it. Pics on page 2

If I cant sell the roller within the next month I will be pulling that apart also: Wheels/tires, rear end, front suspension, rear suspension, roll bar, etc...

Greg@RET

iTrader: (3)

Fuel system sold

98Camarod

iTrader: (43)

Would you be willing to sell the valve covers?

Greg@RET

iTrader: (3)

$250 shipped They have -12 fittings welded on them.

Rick Speed

iTrader: (55)

I'll take the PS pump/res/pulley set up. Do you have or can you include the lines?

Greg@RET

iTrader: (3)

Sorry can't include the lines. It needs to go with the Turbo kit so it stays a complete kit. I sent you a pm with my PayPal address. Please add the 3% or send it under personal and gift.

02_ramair_ta

iTrader: (35)

If you start parting out that turbo kit, let me know.

I have my own hot section, just gathering the rest of the parts.

guero68

iTrader: (20)

whats the brand and type of connection on the injectors...

67drop

iTrader: (22)

what it the part number for the ls3 controller. please pm me your best price to 94070. Thanks

Joel

Greg@RET

iTrader: (3)

Semen Deka 63# black fuel injectors. With the LS3 harness I had to run adapters. If you need the adapters add $50.

$700 shipped is the lowest price. I did extend the coil plug to relocate the coils, so thats already done.
http://www.jegs.com/i/GM%20Performan...0002/-1?CT=999

daws222000

iTrader: (6)

What kit do you have for the four coolant lines. Does it have the crossover block with it? picts to daws222000@yahoo.com

Greg@RET

iTrader: (3)

Steam vent lines sold

tripblackls1

iTrader: (11)

hey greg would you be willing to sell the downpipe/bumper exit exhaust? i could also give you the down pipe from my kit so you still can sell it as whole

Greg@RET

iTrader: (3)

Pm's sent to everyone that wanted parts off the Turbo kit.

Grendel

iTrader: (27)

I am interested in the controller and harness. Does it come with spark plug wires?

What reluctor wheel does it use for the crank position sensor? (Number of teeth?)

Greg@RET

iTrader: (3)

Comes with everything you see in the above link, it runs off the ls3 wheel. If you need it for another wheel you can get the lingenfeler box.

Grendel

iTrader: (27)

LS3 = 58X teeth, right?

I have a 6.0L with the 24X reluctor wheel.

LS1Tw1tch

iTrader: (1)

Are the brakes and the rotors stock if not what brand are they and how much do you want for them?

Greg@RET

iTrader: (3)

I responded to your pm

Keeping that with the roller.

ALTRDTA

iTrader: (69)

Who made that steam/bleeder line and block setup for your car? I assume you, had I seen this earlier I would have purchased it from you. But seeings how it's sold now could you send me in the right direction to get one? Thanks