SS Brandon

iTrader: (33)

Category: Brakes
Price: $895
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): IL
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

********** SOLD **********


Guys,

I have a complete Big Brake Upgrade Kit ready to go. If you want Front CTS-V brakes, then this is the kit you want! I will include all of the following pieces for you to install these brake on your STOCK FACTORY LS1 FRONT SPINDLES.

See these two links for more installation info:
https://ls1tech.com/forums/suspensio...ll-w-pics.html

https://ls1tech.com/forums/suspensio...-kit-info.html


1) '05 CTS-V Calipers (4 piston)
2) Calipers Rebuild w/new parts and Powdercoated Red
3) EBC Bluestuff Pads - One of the first few set in the US
4) C6 Z06 14" Rotors - Cross Drilled and Slotted + Zinc Coated
5) Stainless Steel Braided Line Set - CTS-V to 4th Gen (EB Miller)

Last pic shows the stock 12" rotor vs the new 14" Z06 rotor. NICE !

Spent over $950 for these top notch parts. Installed but never left the garage. 0 miles on this setup.

Good luck finding a set of these calipers in this condition.

Please see my great trader rating.

Thanks,
Brandon

jbrandon3@yahoo.com (Paypal OK)

ICRAZY6

iTrader: (68)

is the Camaro just a sticker or painted on?

SS Brandon

iTrader: (33)

The CAMARO letters are decals. The can be removed without any damage to the Red Powdercoated finish. There is also another smaller CAMARO decal on the back side of the caliper (Not shown in the pics), it is removable as well.

I will try to post more pics tonight when I get home from work.

I hope this info is helpful.

Brandon

PS
PMs back to all that have shown interest.

chon79

iTrader: (24)

Bump for a nice setup!

ICRAZY6

iTrader: (68)

Did you have to cut anything on the front spindles for these to fit?

gocartone

iTrader: (4)

What size rims are needed to run these?

Lythropus

iTrader: (13)

These calipers bolt directly onto f-body 98-02 spindles with no additional work or brackets?

SS Brandon

iTrader: (33)

ICRAZY6 - Absolutely NO cutting required of your stock LS1 spindles for this Big Brake Kit to fit.

gocartone - 18" wheels are required.

Lythropus - Yes, you are correct. These will bolt directly onto your f-body 98-02 spindles with no additional work or brackets. But I needed to install two 1/2" washers (Grade 8) as a shim to line up the caliper on the rotor. Very easy to do. See the link below.


See these two links for more installation info:
https://ls1tech.com/forums/suspensio...ll-w-pics.html

https://ls1tech.com/forums/suspensio...-kit-info.html

LS1HIGHLIFE

iTrader: (8)

all that time and money spent and now you have to sell it all?

NXPRSS

iTrader: (23)

Payment sent! thanks brandon!

SS Brandon

iTrader: (33)

CTS-V Big Brake Kit Sold. Thanks.