Vig 3600 and 4L60E, BMR LCA's, Adj Panhard, TSP 100MM MAF, Hubs with Studs
#1
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
Vig 3600 and 4L60E, BMR LCA's, Adj Panhard, TSP 100MM MAF, Hubs with Studs
Category: Engine - Intake/Fuel
Price: $200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): FL
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Non-LS Part
4L60E never been broken or damaged, stock with 55,000 miles and has a TransGo shift kit, B&M Aluminum Deep Pan. 350 (plus Paypal fees and shipping) SOLD!!!!
The transmission has run good and I was going to keep it but a deal came up on a TH350 that I couldn't refuse. The car was stock up until 47,000 and then I put the converter, pan, and cooler on. Also, I've changed the trans fluid every 3,000 miles or less and I've been running Dexron 6 for 2 years. I recently went H/C/I and I've been looking more towards the drag racing scene. The car is down right now getting a New Hood, K Member, Drag Brakes, Spindles, Weight Reduction, New Trans/Converter, ETC. I posted a vid of the car racing 2 weeks ago to show that the trans works. I'm looking to keep this package together for right now and since my TH350 came in I now have a nice crate to put the 4L60E on. I feel its a fair price considering I paid 750 for the converter alone. The trans is still in the car but can be out in a few days upon sale. If you want a shipping quote please PM me but be warned it will probably be in excess of 200-300 dollars considering I just paid Yellow Freight 200 dollars to ship my 350 from Mississippi to Florida.
http://www.youtube.com/watch?v=2saOvZWVQjM
Used Spohn Adjustable Panhard Rod DOM Part #104 80 shipped (plus 3% paypal fee) It has scratches but is only a year old with less than 500 miles. The bushings look new and I'm selling it because I went to a TRZ setup otherwise I would have kept this. SOLD!!!
Used 2001 F-Body Front Hubs with Lingenfelter L960050000 Extended Studs (measure about 2.75"). 75 shipped (plus 3% paypal fee). I switched over to front drag brakes and no longer need these front hubs. I installed the studs about a year ago and the hubs have 55K on them. I deleted the ABS around a year ago and the sensors worked well but I don't know the true condition of the sensors at this point (just being honest). They are 12mmx1.5 thread!
BMR TH400 Crossmember SOLD!
Used LS1 Billet Aluminum PCV Catch Can SOLD!
Used BMR Lower Control Arms Non-Adj DOM Poly Bushings Part #TCA001 60 shipped (plus 3% Paypal fee). They have scratches/paint missing but work great because I was cutting 1.45 60's. However, I needed offset control arms for tire clearance and this is why I'm selling. SOLD!
Used Flowmaster Y Merge 2 3" Inlets and 1 4" Outlet and O2 Bung Welded in for wideband. Part #FLO-Y300400 25 shipped (plus 3% Paypal fee). I used this for a custom Y-Pipe and it worked great. However, I went to open header so that's why I'm selling it. SOLD!
Used TSP 100MM MAF 180$ shipped (plus 3% Paypal fee) SOLD!
I used the MAF for a couple of initial startups (4-5) and then switched to speed density. It's been sitting on my shelf for a couple of months and has some random scratches. I hard wired the harness so you will need to hardwire the harness to your car. Also, originally I eliminated the IAT wires because I used it on an F-Body. Furthermore, I rewired the IAT portion using GM terminals, weatherpacks, and plain white wire. I left a couple of inches of wire so soldering should be easy. No couplers! Thanks!
Last edited by TurboStangJON; 04-01-2011 at 05:03 PM. Reason: Adding Parts