Comp Turbo CT80, Chiseled Perf A/W, Tial 60mm WG, Aeromotive 1700hp pump setup
08-23-2011, 01:42 PM
#1
Comp Turbo CT80, Chiseled Perf A/W, Tial 60mm WG, Aeromotive 1700hp pump setup Category: Racing Parts
Price: $850
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): CA
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine
rated at 1150hp and only weighs 21lbs flows 123lbs/min
triple BB, water cooled aluminum center section, polished compressor housing
1.15 A/R heat coated turbine with 4" Vband outlet (4 bolt divided inlet)
turbine inlet metal gasket, oil drain fitting/bolts
Also Vband and downpipe starter section included (s/s)
* I have the compressor map if you are interested as well
$1700 shipped to the lower 48
New Tial 60mm WG (silver top) $550 shipped to the 48
New Big BOV: have to look up brand/size $200 shipped to the 48
used Chiseled Performance A/W intercooler rated at 1500hp
4" inlet/outlet, no fittings for the water lines (was on an 8 second turbo V6 powered Toyota pickup!) Ran at strip only about 40 passes. Unit is in perfect condition. Vbands on the 4" inlet/outlets with Orings too.
Dimensions: Core+ end tanks 14x7.5x15" tall (to the shortest 4" inlet)
mounting tab on that side sticks out 3" further
The taller 90* inlet/outlet is 5.5" taller
Bottom of core where it pinches is 4x7.5" wide
2 tabs mounted on 1 side of the end tanks stick out 2" further
All the tabs can be cut and reoriented to fit your setup
As can the 4" 90* bend on the inlet.
$850 shipping TBD based on your location
Aeromotive Pro Series fuel pump rated at 1700hp forced induction with pre and post Aeromotive filters/fittings over $1300 in parts new
from same Toyota pickup truck. Only driven from the trailer to the starting line at the strip and made about 50 passes http://aeromotiveinc.com/products-pa...ies-fuel-pump/
$700 shipped to lower 48
Last edited by gnx7; 08-23-2011 at 07:32 PM.
