415 CI Forged rotating assembly
#1
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Savannah, GA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Category: Accessories
Price: $1300
Location (State): GA
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
Forged Mahle 4.065" flat top pistons with Hellfire rings and floating wristpins. Used: (Rings are like new no wear on them at all).
Callies Compstar I-beam 6.125" rods. BNIB
Eagle 4340 forged 4.000" stroke crank 24 tooth reluctor wheel. Used:
This assembly will fit a stock bore LS3/L92 or a .065" over bored LQ9. An LQ4 will need to be ultrasonic tested to determine cylinder wall thickness before being bored out. The crank and pistons came out of an LQ9 block. Also this assembly will be ~ 12.0:1 CR with 65cc Chambers
I'll take $1300 OBO for the whole assembly.
Price is before shipping costs, buyer will pay actual shipping.
Last edited by shazow1969; 01-26-2012 at 06:55 AM. Reason: price chnge
#5
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Savannah, GA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'd prefer to sell as an assembly, price as a unit is negotiable. All reasonable offers will be considered. This is like $2800 worth of parts, $1500 is a smoking hot deal guys.
Last edited by shazow1969; 01-14-2012 at 10:07 AM.
Trending Topics
#13
Teching In
Thread Starter
iTrader: (3)
Join Date: Jun 2006
Location: Savannah, GA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The rods have zero miles, the crank and pistons have some street and track use, and the rings have exactly eight (8) 1/8th mile passes (no street use). As for power it never went on a chassis dyno, but went 6.80 on motor in the 1/8th in a 3500# 4th gen with a TH350 and 3.89 gears.