Spoolin performance Fbody t6 turbo kit Fender exit- hot side only
#1
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
Spoolin performance Fbody t6 turbo kit Fender exit- hot side only
Category: Racing Parts
Price: $1200
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): CA
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
Fits a stock k member . I used a sphoon solid motor Mounts and fit with plenty of clearance .Kit is based on a borgwarner s475 and tial 60 but will fit any t6 flange turbo (fit my 106mm and precision 60gate)
Kit is brand new never had exhaust trough it . Sold the car and never finished it been sitting for a while .ready to sell.
This is for the hot side only .
Includes :
Truck manifolds Non egr
T6 -2.5 crossover with 60mm tial waste gate flange made of 304 stainless and fully tig welded
5" to 4" bumper exit down pipe with a new qtp 4" electric cut out and a separate 3" v flange exhaust to the stock exhaust (very quiet for the street)
Kit Retails for $1500 with out the extras to the downpipe or the 4" electric cut out or headers.
Website For the kit
http://www.spoolinperformance.com/tr...b0507527e21d98
Link For the turbo kit pictures lot of pictures including some of the car with the bumper exit and engine shot .
http://imageshack.us/mobile/gallery.php
Very very nice kit should also fit a a Lsx mustang with slight modifications
Selling for $1200 firm + PayPal fee and shipping
Or local pick up located in northern California
Pm or email me direct for fastest response
Lsxoo7@live.com
Thank u !
pictures:
What u get
what it looks like with ur suplied t6 turbo and 60mm wastgate
pictures of kit on car and bumper exit position
Last edited by randomnine7; 11-12-2012 at 05:46 PM.
#2
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
All pm replied too .
And u will need a stand up radiator stock or the usual Griffen most people use
U could find a used bws475 used for cheap as well as a tial 60 could easily have a quality turbo kit that could support huuuuuge power for $2kish
And u will need a stand up radiator stock or the usual Griffen most people use
U could find a used bws475 used for cheap as well as a tial 60 could easily have a quality turbo kit that could support huuuuuge power for $2kish
#3
On The Tree
Up for sale is a brand new Spoolinperformance fbody turbo kit ,for a t6 turbo 60mm tial wastegate with a bumper exit 4" electric cut out and a 3" exhaust for the stock location ending by the starter .
Fits a stock k member . I used a sphoon solid motor Mounts and fit with plenty of clearance .Kit is based on a borgwarner s475 and tial 60 but will fit any t6 flange turbo (fit my 106mm and precision 60gate)
Kit is brand new never had exhaust trough it . Sold the car and never finished it been sitting for a while .ready to sell.
This is for the hot side only .
Includes :
Truck manifolds Non egr
T6 -2.5 crossover with 60mm tial waste gate flange made of 304 stainless and fully tig welded
5" to 4" bumper exit down pipe with a new qtp 4" electric cut out and a separate 3" v flange exhaust to the stock exhaust (very quiet for the street)
Kit Retails for $1500 with out the extras to the downpipe or the 4" electric cut out or headers.
Website For the kit
http://www.spoolinperformance.com/tr...b0507527e21d98
Link For the turbo kit pictures lot of pictures including some of the car with the bumper exit and engine shot .
http://imageshack.us/mobile/gallery.php
Very very nice kit should also fit a a Lsx mustang with slight modifications
Selling for $1200 firm + PayPal fee and shipping
Or local pick up located in northern California
Pm or email me direct for fastest response
Lsxoo7@live.com
Thank u !
Fits a stock k member . I used a sphoon solid motor Mounts and fit with plenty of clearance .Kit is based on a borgwarner s475 and tial 60 but will fit any t6 flange turbo (fit my 106mm and precision 60gate)
Kit is brand new never had exhaust trough it . Sold the car and never finished it been sitting for a while .ready to sell.
This is for the hot side only .
Includes :
Truck manifolds Non egr
T6 -2.5 crossover with 60mm tial waste gate flange made of 304 stainless and fully tig welded
5" to 4" bumper exit down pipe with a new qtp 4" electric cut out and a separate 3" v flange exhaust to the stock exhaust (very quiet for the street)
Kit Retails for $1500 with out the extras to the downpipe or the 4" electric cut out or headers.
Website For the kit
http://www.spoolinperformance.com/tr...b0507527e21d98
Link For the turbo kit pictures lot of pictures including some of the car with the bumper exit and engine shot .
http://imageshack.us/mobile/gallery.php
Very very nice kit should also fit a a Lsx mustang with slight modifications
Selling for $1200 firm + PayPal fee and shipping
Or local pick up located in northern California
Pm or email me direct for fastest response
Lsxoo7@live.com
Thank u !
What would I need to get to make it a COMPLETE kit w/ an intercooler, obviousy an intercooler, a turbocharger, then what?
#4
TECH Apprentice
Thread Starter
iTrader: (23)
Join Date: Mar 2007
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
As far as the turbo kit
U would need a :
Turbo
Wastegate
Oil feed
Drain
Intercooler and piping
Blow off valve
And a exhaust shop to finish te 3" down pipe section from the starter to ur stock exhaust
Engine wise
Injectors fuel pump map sensor and a tune and ur ready to rock
Not much more and defiantly worth it . Pm me if ur interested
U would need a :
Turbo
Wastegate
Oil feed
Drain
Intercooler and piping
Blow off valve
And a exhaust shop to finish te 3" down pipe section from the starter to ur stock exhaust
Engine wise
Injectors fuel pump map sensor and a tune and ur ready to rock
Not much more and defiantly worth it . Pm me if ur interested