Tuner for multiple tunes on the fly?
#1
TECH Apprentice
Thread Starter
iTrader: (11)
Join Date: Jan 2008
Location: Lubbock Texas
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Tuner for multiple tunes on the fly?
Im used to mustang tuning, like carrying the SCT X-cal with 3 tunes to choose from, and can switch to any one in about 1 minute.
Is there something we can use, like a handheld tuner that can carry multiple tunes saved on it, and switch from an N/A tune to a Nitrous tune, maybe between runs?
What tuners/tuning software can be used?
Any help is appreciated, thanks.
Is there something we can use, like a handheld tuner that can carry multiple tunes saved on it, and switch from an N/A tune to a Nitrous tune, maybe between runs?
What tuners/tuning software can be used?
Any help is appreciated, thanks.
#4
LS1Tech Sponsor
iTrader: (2)
Im used to mustang tuning, like carrying the SCT X-cal with 3 tunes to choose from, and can switch to any one in about 1 minute.
Is there something we can use, like a handheld tuner that can carry multiple tunes saved on it, and switch from an N/A tune to a Nitrous tune, maybe between runs?
What tuners/tuning software can be used?
Any help is appreciated, thanks.
Is there something we can use, like a handheld tuner that can carry multiple tunes saved on it, and switch from an N/A tune to a Nitrous tune, maybe between runs?
What tuners/tuning software can be used?
Any help is appreciated, thanks.
#6
TECH Apprentice
Thread Starter
iTrader: (11)
Join Date: Jan 2008
Location: Lubbock Texas
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
What about an SCT Xcal 2/3/livewire/
The tuners I know around here use HP, so something friendly with that would help.
Otherwise, what tuning software is needed?
I know the SCT requires an .LL3 format, and the predator has something like a .prg file, or something wierd, question is, can HP tuners make a tune in that format?
Last edited by Modern_Muscle; 04-02-2009 at 12:49 PM.
Trending Topics
#8
LS1Tech Sponsor
iTrader: (2)
can you load an HPtuners tune on a Predator?
What about an SCT Xcal 2/3/livewire/
The tuners I know around here use HP, so something friendly with that would help.
Otherwise, what tuning software is needed?
I know the SCT requires an .LL3 format, and the predator has something like a .prg file, or something wierd, question is, can HP tuners make a tune in that format?
What about an SCT Xcal 2/3/livewire/
The tuners I know around here use HP, so something friendly with that would help.
Otherwise, what tuning software is needed?
I know the SCT requires an .LL3 format, and the predator has something like a .prg file, or something wierd, question is, can HP tuners make a tune in that format?
You'd need tunes created with CMR, our tuning software. We use .grg file extension on our newer GM Predators.
#11
Former Vendor - No longer Vendor
iTrader: (3)
Join Date: Nov 2006
Location: Decherd, TN
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Get EFILive, flash with Custom OS #5. Flip a switch, your now running your nitrous tune. That will do exactly what your wanting to do. You wont have to reflash or shut off your car. We have been running that setup on our n2o cars for a long time now.
This is our main car we use:
Doc's Car
This is our main car we use:
Doc's Car
#12
Staging Lane
iTrader: (2)
Join Date: Jan 2007
Location: TX
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Get EFILive, flash with Custom OS #5. Flip a switch, your now running your nitrous tune. That will do exactly what your wanting to do. You wont have to reflash or shut off your car. We have been running that setup on our n2o cars for a long time now.
This is our main car we use:
Doc's Car
This is our main car we use:
Doc's Car
#13
Former Vendor - No longer Vendor
iTrader: (3)
Join Date: Nov 2006
Location: Decherd, TN
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
basically with the cos5 on efilive when you flip the switch to arm your nitrous its sets a ground on the pcm which tell the it to flip you to the nitrous tables in cos5, usually pulling 2-4 degrees of timing and adding fuel when needed based on your nitrous shot. in order to do all of this you have to add a double throw double pull relay to your system in place of your stock nitrous relay.
#16
Banned
iTrader: (43)
Does it do it, on the fly? Or must you shut it down to flash it? You'd still need a laptop, either way, correct?
PS Bill thanks for the help with the injector pulse display. The 2.2 doesn't display banks, it show each individual injector. Now I eliminated that as the running issues.
#17
FormerVendor
iTrader: (45)
A simple relay resistor box inline with the IAT that switches on with the nitrous arming can easily let you adjust WOT spark AND fuel with HPT, Edit, EFIL... any of these. Run full N/A timing and fueling and when armed be able to run different spark and fuel for the jug...
#18
12 Second Club
iTrader: (8)
Join Date: Nov 2004
Location: Royal Oak, MI
Posts: 205
Likes: 0
Received 0 Likes
on
0 Posts
EFILive is doing beta testing right now to be able to reflash a pcm with the flashscan V2 without a laptop. You will be able to store multiple tunes on a sd card and flash anyone you want in about a minute. You can already log data to the sd card without a laptop.
#19
LS1TECH Sponsor
iTrader: (2)
Does it do it, on the fly? Or must you shut it down to flash it? You'd still need a laptop, either way, correct?
PS Bill thanks for the help with the injector pulse display. The 2.2 doesn't display banks, it show each individual injector. Now I eliminated that as the running issues.
PS Bill thanks for the help with the injector pulse display. The 2.2 doesn't display banks, it show each individual injector. Now I eliminated that as the running issues.
-Bill