Car failed smog test.. but passed emissions... need help!
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok, so my car failed the smog test, but it passed the visual and emissions test. It was the readiness test that it failed. It says catalyst not ready, etc... What do you guys think i can do? Can i just download someones completely bone stock tune and upload it or something? I thought i reflashed the thing, but i guess i did it wrong?
#2
TECH Enthusiast
iTrader: (16)
Join Date: Jun 2005
Location: San Luis Obispo, CA
Posts: 732
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok, so my car failed the smog test, but it passed the visual and emissions test. It was the readiness test that it failed. It says catalyst not ready, etc... What do you guys think i can do? Can i just download someones completely bone stock tune and upload it or something? I thought i reflashed the thing, but i guess i did it wrong?
#7
Moderator
iTrader: (11)
Join Date: Mar 2002
Location: East Central Florida
Posts: 12,604
Likes: 0
Received 6 Likes
on
6 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Go through the DTC section and make double sure that
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.
Trending Topics
#8
TECH Addict
iTrader: (6)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Go through the DTC section and make double sure that
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.
Bill
#11
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
this whole smog biz is quite funny with these tuners around, haha
viva hp tuners and efi live
life savers for modern hot rodders
the reality is most people don't drive these cars enough to actually warrant emissions levels high enough to hurt anything ...
viva hp tuners and efi live
life savers for modern hot rodders
the reality is most people don't drive these cars enough to actually warrant emissions levels high enough to hurt anything ...
#14
TECH Addict
iTrader: (4)
Join Date: Nov 2001
Location: Sugar Land, TX
Posts: 2,485
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Maybe this will help. I've highlighted I believe what Jimmyblue is referring. There are quite a few more down the list so this is example only.
Last edited by Larry; 02-05-2010 at 04:32 PM.
#16
Launching!
iTrader: (2)
Join Date: Feb 2004
Location: Ca.
Posts: 245
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Go through the DTC section and make double sure that
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.
when you "tune out" codes, you set them to "Enabled,
No Error Reported" (3, in HPTuners) and -not- "Disabled".
Disabled tests will prevent the higher level Readiness
checks from completing. When everything runs with
No Error you're good.