disable the security???
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Dec 2003
Posts: 1,520
Likes: 0
From: Phila, Pennsyltucky
disable the security??? Can any of the programs like ls1edit delete the freakin horrible security system on my camaro? Every other time i get in it , i have to wait around until the security lets me start it. If it can be eliminated that would be perfect.
TECH Fanatic
Joined: Oct 2002
Posts: 1,648
Likes: 0
From: F.H,Waterford,Port Huron, MI
If I remeber right all you need to do is but the key in and press the lock unlock button! Or something like that, DEI sent me a printout but I lost it! As the aftermarket alarm was fighting the stock one!
Thread Starter
TECH Fanatic
iTrader: (4)
Joined: Dec 2003
Posts: 1,520
Likes: 0
From: Phila, Pennsyltucky
Originally Posted by 2FAST4U
If I remeber right all you need to do is but the key in and press the lock unlock button! Or something like that, DEI sent me a printout but I lost it! As the aftermarket alarm was fighting the stock one!
Trending Topics
The resistor thing is super easy. That's the way I did mine. Just measure the resistance value of your key, go to radio shack and buy enough resistors to add up to the value of your key (+- 10 ohms). Just cut the wire on the column end of the connector and use the connector that now has two wires on it and wire the resistors there.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Hey dude! We turn off VATS in the PCM, that just leaves starter enable to fix. The options are to either measure the resistance value of the pellet in the key and replace in the harness as noted, or find the wire that leads from the column to the BCM that is hot when the ign key is turned to "start" and jump around the BCM. You jump to the purple wire that exits the BCM and goes to the starter itself.
