EFI Live?
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Nov 2003
Posts: 1,037
Likes: 0
From: Gardnerville, NV.
EFI Live? I just ordered the V1 scan tool and I'm looking at wideband stuff. Can I hook this $79 Innovate sensor directly to my scan tool? Data Acquisition, Oxygen Sensor, Bosch LSU 4.2, UEGO, 0.0 to 5.0 V, Wide Band
Or do I need the full $200 Data Acquisition, LC-1 Lambda Cable with O2 Sensor, Stand-Alone Wideband Controller
Also, do you place this sesnor in the narrowband bungle for testing and then put the narrowband back in or do I need to weld in a new bungle for the wideband sensor. I only have two bungles in my exhaust as there are no provisions for the rear 02s in my setup.
TIA.
Or do I need the full $200 Data Acquisition, LC-1 Lambda Cable with O2 Sensor, Stand-Alone Wideband Controller
Also, do you place this sesnor in the narrowband bungle for testing and then put the narrowband back in or do I need to weld in a new bungle for the wideband sensor. I only have two bungles in my exhaust as there are no provisions for the rear 02s in my setup.
TIA.
Hou need the care-and-feeding box, the sensor alone won't
do anything and has to be heat-controlled to stay any kind of
accurate.
I would go get a "test bung" welded into the I-pipe. Some of
Innovate's kits come with one. Don't use the stupid little
Allen plug, though; get a Toyota oil pan plug instead.
do anything and has to be heat-controlled to stay any kind of
accurate.
I would go get a "test bung" welded into the I-pipe. Some of
Innovate's kits come with one. Don't use the stupid little
Allen plug, though; get a Toyota oil pan plug instead.
Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Nov 2003
Posts: 1,037
Likes: 0
From: Gardnerville, NV.
TECH Resident
Joined: Oct 2005
Posts: 781
Likes: 0
From: Taxme, Ohio
I just ordered the V1 scan tool and I'm looking at wideband stuff. Can I hook this $79 Innovate sensor directly to my scan tool? Data Acquisition, Oxygen Sensor, Bosch LSU 4.2, UEGO, 0.0 to 5.0 V, Wide Band
Or do I need the full $200 Data Acquisition, LC-1 Lambda Cable with O2 Sensor, Stand-Alone Wideband Controller
Or do I need the full $200 Data Acquisition, LC-1 Lambda Cable with O2 Sensor, Stand-Alone Wideband Controller
The V1 has a couple of extra analog inputs that can read a 0-5V signal. I'm a little rusty on the setup, but all the information is in the V1 user manual and there's also a tutorial on the Innovate website that goes through the hookup.
I didn't see an answer to this question. Since I just bought the V1 FlashScan myself I'm interested in this part of your question. I have the Innovate LM-1 and assumed I have to go from it to the FlashScan. The FlashScan will then read the LM-1 (or LC-1) just like a sensor to a gauge. Maybe I have it wrong
Trending Topics
TECH Resident
Joined: Oct 2005
Posts: 781
Likes: 0
From: Taxme, Ohio
Thanks. I'll look in the manual about scaling the voltage to match either a/f or lambda.
This FlashScan V1 is a boatload of fun; really nice with the virtual dash. The programmer did a nice job with the 7.5.1 software. Thanks ssheets for use of the thread.
This FlashScan V1 is a boatload of fun; really nice with the virtual dash. The programmer did a nice job with the 7.5.1 software. Thanks ssheets for use of the thread.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Fanatic
iTrader: (1)
Joined: Nov 2003
Posts: 1,037
Likes: 0
From: Gardnerville, NV.
My V1 scan tool should be here today...I'm on the East slope of the Sierra mountains near Lake Tahoe. If you watch the news we're getting pounded by a major storm event. We're on generator at work (my 4MW auto system) and the rain is intense. We expect the rain to turn to snow (feet) by nightfall.
Needless to say, my SS will not be going outside for awhile.
My pleasure.
My V1 scan tool should be here today...I'm on the East slope of the Sierra mountains near Lake Tahoe. If you watch the news we're getting pounded by a major storm event. We're on generator at work (my 4MW auto system) and the rain is intense. We expect the rain to turn to snow (feet) by nightfall.
Needless to say, my SS will not be going outside for awhile.
My V1 scan tool should be here today...I'm on the East slope of the Sierra mountains near Lake Tahoe. If you watch the news we're getting pounded by a major storm event. We're on generator at work (my 4MW auto system) and the rain is intense. We expect the rain to turn to snow (feet) by nightfall.
Needless to say, my SS will not be going outside for awhile.
Bill
