GEN7DFI

Just to let you guys know we will be shipping a beta box to one of the board members here and a vendor to you guys (same person) for testing and the ls1tech.com stamp of approval.

Bink

Would this work in a 2001 Vette with the BCM etc.????Hmmmmm........?
joel

Joe Overton

Sup K** D**** .....
I'll give it a stamp of approval... If it works as well as it does on my lt1, which I'm sure it does,I'm surely in trouble .Gonna force me to build a ls1

2fast4u2c

Hey I found a price for it... hehe no not really but the price I was able to find for the lt1 system is $1585. The ls1 system should be somewhere in that ballpark for all those dreamers out there.

GEN7DFI

Hello Joe, I tried to call you today about these no luck??? ill speak with you tomorrow

Joe Overton

cool give me a shout I spoke to Noah monday about them...I been talking to Mike about about these since last sept.. glad to see it come to light..

Pro Stock John

iTrader: (34)

2fast....

I'm thinking low $2000's for the DFI + $900 for the wideband at regular retail. Might see some $2500 total pricing but we will see.

I'm very impressed with the plug'n play design of the setup I think the FAST guys will be playing catchup. I myself bought FAST but if the DFI works well I could change.

John
4 sets of headers in four years

GEN7DFI

Ok jobber price will be 2150.00 and the very first kits are being shipped this week.

Phate

iTrader: (2)

Jobber price with the wideband?

Thanks,

Scott

Pro Stock John

iTrader: (34)

Cartek is an ACCEL DFI dealer you may want to try them Scott.

Mekkadon

iTrader: (3)

This is a lot cheaper than what I was expecting. I'll be sure to watch for any updates on this.

I'm guessing you can run low impedance injectors with this system?

Joe Overton

The system runs low and high impedance injectors

Pro Stock John

iTrader: (34)

The $2150 he is mentioning does not include the wideband.

I look foward to seeing some testing on the boxes.

Joe Overton

John the kits mentioned that are going out are beta systems ....should be feedback within 2 weeks about the same time the actual production units will be available.. the $2150 is jobber for base only, the wideband is option at a additional price..

GEN7DFI

Joe Overton is also an accel DFI dealer and can sell you the kit. The wideband option will be 950.00 extra you can add it when you purchase the kit or down the road as no pcm mods are necessary. We are shipping a kit or 2 to some of the list members here for the final testing.

Pro Stock John

iTrader: (34)

Joe is not a sponsor.

GEN7DFI

Sorry didnt know that

JS

iTrader: (4)

This isnt lance ward is it?

I'd expect the system to cost about 2500 bucks but if its less then they will sell a SHIAT load of them.

I have a friend who's an EMIC,He has the Accel WB box that he uses to tune the GEN VII systems when guys dont spend the $$ for the option.

I can borrow his and head over to the dyno for some tuning. Then take it off and run off my stock o2's when I'm driving around plus I can turn off those dreaded knock sensors for good.

As long as the systems tuned,its safe

GEN7DFI

this is not lance, the jobber price is 2150, and an extra 950 if you want a wideband

Phate

iTrader: (2)

The Gen7 and Motec look pretty close price wise. The only problem with the Motec is that there is no PnP harness for it.

Will the PnP harness be available separately?

Thanks,

Scott