what did you do to your firebird today?
#3244
TECH Regular
iTrader: (1)
John
#3245
TECH Regular
I did the same as JohnR in my 2002 Firehawk. Full power and speed to both windows motors, should have been designed this way from the factory.
#3246
Staging Lane
iTrader: (2)
i worked for a pontiac dealer in the parts department as a manager back in the mid 90's to about 2004 and we were always replacing them the motors and regulators, i would have thought motors would have changed by now.
thank for the info and will add to my winter list of things to do!
thank for the info and will add to my winter list of things to do!
#3248
I got my Strano springs and Koni 4/4's installed.
Still need to put on the adjustable panhard bar, but the rear end isn't *too* far from center. Then add the Strano sway bars and I'm good to go.
Still need to put on the adjustable panhard bar, but the rear end isn't *too* far from center. Then add the Strano sway bars and I'm good to go.
#3251
#3252
Staging Lane
Join Date: Feb 2009
Location: Cleveland, OH
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Since my 12 disc cd player took a dump figured I'd just upgrade the HU to a double din! Hoping to experiment and get some modernized climate control ***** fitted here soon too
#3254
Staging Lane
Join Date: Feb 2009
Location: Cleveland, OH
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
http://www.ebay.com/itm/112272997936...%3AMEBIDX%3AIT
#3258
TECH Resident
iTrader: (9)
IIRC some people are using Mazda 3 or 6 ***** for the HVAC controls. They looks pretty similar to the ones posted.
Got to install my new 555 G2's today. Also, changed out my DRLs for the millionth time. After these go out, I'm definitely switching to LED!
Only a little bald..
Got to install my new 555 G2's today. Also, changed out my DRLs for the millionth time. After these go out, I'm definitely switching to LED!
Only a little bald..
#3259
TECH Regular
iTrader: (1)
Finally finished replacing all 10 speakers with a set from Kee Audio. A previous owner had replaced the 2 back seat subs with a pair of 5" plain speakers, and one of them wasn't working. I had to trim the door panel a little in order to get it past the new 6.5" speakers. I also put in some Fatmat while I was in there. Now it all sounds awesome again.
Next step is replacing the stock head unit with a Kenwood unit from Kee.
John
Next step is replacing the stock head unit with a Kenwood unit from Kee.
John
#3260