CoreyD

iTrader: (9)

I took out the stock cooler a while back before I added the auxiliary cooler, so I hope not lol. This rack is a AC Delco reman from rock auto, little over 2 years old I think.

May just bite the bullet and get a TurnOne rebuild

Barn Find CETA

iTrader: (1)

This would be great on Halloween. Scary noises lol.

ramairjohn2000

iTrader: (3)

Redid my rack last winter from the rack doctor and shouldn’t be anyway anti freeze would get in there?

CoreyD

iTrader: (9)

Flushed my power steering and added new synthetic fluid. Seemed to help at first, but sure enough the creak came back.

Tentative plan is to search for a core and send to TurnOne and then replace the rack, motor mounts, and oil pan gasket at once.

Barn Find CETA

iTrader: (1)

you are sticking running your stock engine mounts? Probably nothing left of the rubber in there. Lol.

CoreyD

iTrader: (9)

😅😅 Yeah they’re not in great shape lol

CoreyD

iTrader: (9)

Latest example in the gauge pod series. Had someone ask me for one with room for TCS switch. It was tight, but Was able to incorporate everything into the plate.

blackbyrd

iTrader: (14)

If I didn't shave mine I'd have you make one with a push button start

CoreyD

iTrader: (9)

Car was riding noticeably rougher, and making some noise from the right rear. I got under and noticed the lower bushing on my Koni was gone.





after I removed it the stud basically fell off. The shocks have certainly seen better days, though they are pretty up there in age. Replaced it with a brand new Koni Yellow.

ordered the other rear shock last night.l too. Going to be looking at the fronts ones soon as well

CoreyD

iTrader: (9)

Drivers side ✅

blackbyrd

iTrader: (14)

Im shocked (pun intended) you havnt looked into a set of coilovers now that you are spending more time on the track.

CoreyD

iTrader: (9)

lol I thought about it! I couldn’t justify almost twice the cost though. Figured I could put that money towards better tires or something.

Did I mention I got a TurnOne rack? Need to find a weekend to install that

blackbyrd

iTrader: (14)

No ! you will have to let me know how that performs..... I have concerns about my current one.

CoreyD

iTrader: (9)

I will! Think they have a 6 week lead time right now. I was luckily able to find a new one on marketplace here. Which I’m thankful for bc I really didn’t want my car to be sidelined for 6 weeks

blackbyrd

iTrader: (14)

Sounds like a fall purchase hahahaha.

CoreyD

iTrader: (9)

Double gauge pod for another member here! Excited to see this one installed

blackbyrd

iTrader: (14)

you always come up with some cool stuff, one of these days im gonna come up with something for you to print for my car

CoreyD

iTrader: (9)

Let me know! I'll hook you up

CoreyD

iTrader: (9)

Got in a nice run with a 2018 RS5. Quick cars! Ran from maybe 65-115 and we were really close, I had him by maybe a fender/door. He said it was stock. Ole LS1 still putting in work!

blackbyrd

iTrader: (14)

Those are sharp cars!