When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Pic wasn’t working in last post. Fixed it. Also got first prototype for TA vent pod. Going to be tricky to get it to not spin around, but I have something in mind.
Also ran a scat pack challenger last night, not sure what he had done other than exhaust. He pulled up next to me revving and he honked it off. Did like a 65 roll and I had him by a car at 100. I guess he wasn’t happy because he hastily took the next exit lol
used a harbor freight windshield removal tool and sawed off this sail panel off a 96. Took maybe an hour total with breaks but once we got the wire hot it was moving. Deciding if I should DIY paint like my mirrors or take it somewhere. Not in a huge rush.
also found these ttop rubber trims in good shape on the same car. I’m going to model them and try my hand at printing some in TPU for whoever
Fresh paint on the daily! Clear coat on the 4Runners hood has been quickly deteriorating. It was looking bad bad. Was lucky to find a body shop that could squeeze me in and had me in and out in a few days 👌
New steering wheel! OG one was thrashed and sun damaged real bad. Picked up this Camaro wheel. Didn’t realize until recently the camaro wheels were a little thicker and had ribbing.
also working on a driver side vent for camaros. First attempt looking good. Need to make a couple changes then will have a working piece
New steering wheel! OG one was thrashed and sun damaged real bad. Picked up this Camaro wheel. Didn’t realize until recently the camaro wheels were a little thicker and had ribbing.
also working on a driver side vent for camaros. First attempt looking good. Need to make a couple changes then will have a working piece