mrobvious34

my dad has an 04 gto that he wants to put custom wheels on. I had some black 17x9.5 ZR1 wheels on my WS6 that i was going to give him but they were too wide. What is a good size wheel and tire combo for a 04 GTO

massillongoat

iTrader: (3)

245/45/17 you can't fit much more with modfication

KrautBurner

iTrader: (5)

ROH makes staggered (with the right bolt pattern and offset)
http://www.groupawheels.com/
http://www.groupawheels.com/Catalog....9-ddb68fe7ca3a


18x9 front
18x10 rear

also available in 17 and 19






here's the only staggered ones I can find.

http://www.groupawheels.com/ProductD...c-2b797ce32717

KrautBurner

iTrader: (5)

but with "minor" modification you can easily fit 275/40-17's (on stock 17x8, or wider wheels)


all I did to mine was have the fender lips "trimmed" (ground down a little)
other's tend to roll them.

KrautBurner

iTrader: (5)

you may be able to run them in the back (either milling the wheel surface (or with spacers) to get the right offset)
but you will probably have to find something narrower for the front (I believe 17x9 max (with correct offset))




good luck

geeteego

iTrader: (1)

CCW Wheels

KrautBurner

iTrader: (5)

oh yeah,


Fiske wheels: http://www.fikse.com/
they don't get much better than these... http://www.fikse.com/products.html

Summerwolf

iTrader: (3)

vqmotoring.com

I have the RUFF R280's in 18X9.5 in back with some wide tires and 18X8.5 in front with some wider than stock tires.

DA GOAT!

iTrader: (1)

I've got some Zinik 20's for sell!

https://ls1tech.com/forums/pontiac-g...ig-brakes.html

KrautBurner

iTrader: (5)

are those the right bolt pattern for a gTO? (5x120)

DA GOAT!

iTrader: (1)

Yep! I had them on my 04 GTO.

ls 2 goat

I saw these things on his car..The wheels look sick.

Smo's04Gto

iTrader: (8)

Go over to ls1gto.com and look in the wheel section lots of photos and good advice

Rob

iTrader: (6)

I had 275 Nittos on the stock wheels with no mods needed.

Also ran 275 Toyo's on my 9" Drift R's with no mods needed. Now running BFG KDW 265's on the same Drift R's, also without mods needed. The BFG's are actually wider than the Toyo's they replaced.

17x9 WS6 or SS wheels fit great in the back. They need to be shortened to work in the front though. I had my old WS6 wheels on the back of mine with 275 Nittos and they were fine.

geeteego

iTrader: (1)

I'll take your Fiskes and raise you a set of these.

Insane

275/30 19x9.5 on rear with 5/16 raise spring, sits a quarter of an inch higher in the rear

yellowjacketfever

i have a complete set of corvette wheels on my 04. 18/275/45's. and 275/45/17's on the front. it did take some minor mods to make them work!!!

sprocketeer

I did 18X8 front 235/40r18 and 18X9.5 rear 265/35 r18 and rolled the rear quarters. TSW Croft from VQMotoring. I am also lowered 35mm front and 20mm rear. Offsets are 35mm front, 48mm rear.

DNTMPME

I was considering putting a set of Z06 motorsports staggered set on mine but I haven't seen anyone with them yet... Anyone know of someone with these and/or maybe some pics... They are the black/polished lip w/ rivets... I was wanting to do the 17/18 combo but wasn't sure about the widths... I'm used to f-bodies so this is greek to me... Thanks for any help...