pyro4ik

I want to take off the 6.0 and pontiac badges off the back and the GTO badges off the sides.......any idea how to remove them cleanly???

MasterTomos

iTrader: (15)

I've always used dental floss or fishing string. Works great. Take off the excess adhesive left on the car with rubbing alcohol, and then clay bar/wax the area.

BAM! done.

409CISecondGen

iTrader: (2)

What I did:
1. Heat gun to warm up the adhesive
2. Dental floss to remove the badges
3. Goo gone to remove leftover adhesive.
4. Clay/Wax to protect.

bedo

man that picture really makes me wanna do mine..looks really clean

pyro4ik

Awesome, thanks. I'm going to do that after work. I dont have a heat gun but maybe a hair drier will work.

MasterTomos

iTrader: (15)

You don't really need a heat gun, I've never used one.

409CISecondGen

iTrader: (2)

Yea, I've done it before without a heatgun. But in my experience, the heat lets the adhesive come off easier. That in turns means less rubbing with the goo gone and less chance of swirl marks on the paint. The swirls are going to be especially noticeable on black cars.

pyro4ik

Do the GTO badges on the sides come off the same way?

Just asking b/c on the Lightning I had you could peel some badges off but others you had to snap off and there were holes behind.

409CISecondGen

iTrader: (2)

I believe there are holes behind the front fender badges

codysgto

There is a big hole on the side ones and arrowheads. floss and M3 adhesive remover works.

Summerwolf

iTrader: (3)

Big hole on the side ones. After removing them, weld up the holes and repaint the fender.

bdalegto

Or you could put a side marker where the side badges are.

pyro4ik

speaking of side markers, I bought a set of clear ones and have no idea how to put them on...any ideas?