When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'd like to see where everyone is placing there T6 turbos.
I need to run a full exhaust , prefer to keep abs, standing up radiator and I have a turbo k member.
I'd like to see all my options before we make the hot side.
There's more pics than you'll know what to do with in this thread: https://ls1tech.com/forums/forced-in...cs-please.html
I used the Huron Speed T6 hotside kit, but couldn't get a 4" exhaust out back. I did tweak it so I have a 3" out back, and a 4" boost actuated dump up front.
Might have been a bit of over-design on it, but I'm very happy with my end result.
There's more pics than you'll know what to do with in this thread: https://ls1tech.com/forums/forced-in...cs-please.html
I used the Huron Speed T6 hotside kit, but couldn't get a 4" exhaust out back. I did tweak it so I have a 3" out back, and a 4" boost actuated dump up front.
Might have been a bit of over-design on it, but I'm very happy with my end result.
do you have any video of you car running with the dump activated? would love to hear what that set up sounds like. Nice build
do you have any video of you car running with the dump activated? would love to hear what that set up sounds like. Nice build
Sorry, but I don't. The boost actuated cutout is capable as cycling every bit as fast as a throttle body. This one I think starts opening at 5 PSI and is full open at 11 PSI. I know you can find some vids if you search for "sound performance boost actuated cutout" but as for me, I have no vids yet.
12-22-2016, 06:27 PM
Post up your big single 4th gen setups. 
