When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I will flatten my steam tubes and see if that would suffice. I'm in the process of tearing it down and doing a head/cam swap. It may be a few weeks before I will be able to test fit. Are you running a HVAC system on your car? I noticed that there isn't a small port on the back of the intake. May drill and tap a port or T off of the brake booster port.
I didnt realize this before. So thats another issue. Easily remedied but still its another issue I overlooked.
Hopefully Ill have my intake back this weekend. Im going to tap the back of it and add a fitting for the hvac system. Anyone know what size the hvac lines are? Also Ill work on flattening the steam tubes to clear this intake. I dont think itll take much. It looks identical to a fast 92 underneath.
Just to update. Got my intake back today with the runners smoothed out. Im going to drill and tap the intake tomorrow to add a 1/4 nipple for the hvac system. Ill report back on that.
Someone will need to make a write up on how to install these on a 4th gen. Its not a bolt on part and will require some modification. Ill gladly help with what info I have so far. Hope to have it on and running by next weekend.
Just to update. Got my intake back today with the runners smoothed out. Im going to drill and tap the intake tomorrow to add a 1/4 nipple for the hvac system. Ill report back on that.
Someone will need to make a write up on how to install these on a 4th gen. Its not a bolt on part and will require some modification. Ill gladly help with what info I have so far. Hope to have it on and running by next weekend.
Would you post pics of your smoothed out runners? It was my first time porting my intake and just curious how yours came out. My heads/cam parts will deliver tomorrow so I won't be to far behind your install date.
So if you want to have the map sensor in the front, from the pics it looks like this does not have a sensor port in the same location as the actual ls2 intake (which is front pass. side), but in the cover for the EGR hole there's a port (?) that looks like it would have to be drilled out?
Would you post pics of your smoothed out runners? It was my first time porting my intake and just curious how yours came out. My heads/cam parts will deliver tomorrow so I won't be to far behind your install date.
I will post pics as soon as I find time. I have a uncompleted rough draft of a write up but I am not done. I still am dealing with fitment issues.
I have the intake on and car is running smoothly. So far so good. I will hopefully post a write up today for those interested. Someone asked for pics of my smoothed out intake runners so here you go.
Hopefully Ill have my intake back this weekend. Im going to tap the back of it and add a fitting for the hvac system. Anyone know what size the hvac lines are? Also Ill work on flattening the steam tubes to clear this intake. I dont think itll take much. It looks identical to a fast 92 underneath.
4 corner steam vent tube didn't fit under my fast, I flattened them out and had them touching the vally cover and still was a no go.
The mad rush for the intake has seemed to have slowed down. Which is surprising to me I would have guested it to carry out a bit longer. Rockauto has cornered the online market on these for now . Id ltk ... How many guys have installed and are running the LS2D and Warr 92 tb combo now ?
The mad rush for the intake has seemed to have slowed down. Which is surprising to me I would have guested it to carry out a bit longer. Rockauto has cornered the online market on these for now . Id ltk ... How many guys have installed and are running the LS2D and Warr 92 tb combo now ?
Thats the setup I'm running. I came from a ls1 intake and ported tb. It was a noticeable upgrade on the butt dyno. I made a thread about the install and how I did it.
I am very happy with my setup. I gained an additional 30whp with the street/dyno tune from my local speed shop. Mods are in my sig. Will report back when I get to hit the track. Going from a baseline of 334whp (just headers/lid/tune) to 480whp is a night and day difference lol.