LS1TECH - Camaro and Firebird Forum Discussion

Forced Induction Superchargers | Turbochargers | Intercoolers

AEM Wideband Install

Thread Tools
 
Search this Thread
 
Old 04-08-2018, 02:56 PM
  #1  
Teching In
Thread Starter
 
Randy Engler's Avatar
 
Join Date: Apr 2018
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default AEM Wideband Install
Got an AEM wideband AFR gauge installed yesterday, getting my truck ready for boost. Next step for the wideband is to attempt to connect the serial communications for logging in HP Tuners. Video here:
Randy Engler is offline  
Reply Like
Old 04-08-2018, 05:59 PM
  #2  
TECH Apprentice
iTrader: (2)
 
Black89Z51's Avatar
 
Join Date: Nov 2011
Location: Newport News, VA
Posts: 319
Likes: 0
Received 0 Likes on 0 Posts
Default
Hooking it up is the easiest thing in the world. Data wire and a ground wire. Done.
Black89Z51 is offline  
Reply Like
Old 04-08-2018, 09:25 PM
  #3  
11 Second Club
 
qweedqwag's Avatar
 
Join Date: Dec 2016
Posts: 666
Received 4 Likes on 3 Posts
Default
So right now your only reading one bank of the engine?
qweedqwag is offline  
Reply Like
Old 04-08-2018, 09:54 PM
  #4  
Teching In
Thread Starter
 
Randy Engler's Avatar
 
Join Date: Apr 2018
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by Black89Z51
Hooking it up is the easiest thing in the world. Data wire and a ground wire. Done.
Well I must be doing something wrong, or this thing is defective, or my laptop/HP Tuners isn't set up right, cause I can't get it to communicate over serial with HP Tuners. Will make some phone calls about it tomorrow.
Randy Engler is offline  
Reply Like
Old 04-08-2018, 09:56 PM
  #5  
Teching In
Thread Starter
 
Randy Engler's Avatar
 
Join Date: Apr 2018
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by qweedqwag
So right now your only reading one bank of the engine?
Yes right now it is only reading the drivers side bank, once I have the turbo installed I will relocate the sensor so it is reading from both banks.
Randy Engler is offline  
Reply Like
Old 04-09-2018, 05:52 PM
  #6  
TECH Addict
iTrader: (32)
 
brandon6.0's Avatar
 
Join Date: Dec 2009
Location: Glennville, GA.
Posts: 2,303
Received 22 Likes on 19 Posts

Default
Nice placement. Will drink holder still flip up with it there? Are u using hptuners pro or std?
brandon6.0 is offline  
Reply Like
Old 04-10-2018, 09:14 AM
  #7  
Launching!
iTrader: (6)
 
91 240's Avatar
 
Join Date: Feb 2008
Posts: 224
Likes: 0
Received 15 Likes on 11 Posts

Default
Originally Posted by brandon6.0
Are u using hptuners pro or std?
Pro is simple. Standard takes a little work to use the AC Press or EGR sensor
91 240 is offline  
Reply Like

Trending Topics

Old 04-11-2018, 07:37 PM
  #8  
Teching In
Thread Starter
 
Randy Engler's Avatar
 
Join Date: Apr 2018
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by brandon6.0
Nice placement. Will drink holder still flip up with it there? Are u using hptuners pro or std?
No unfortunately the cup holder won't flip up anymore. Using the standard version of HP Tuners.
Randy Engler is offline  
Reply Like
Old 04-11-2018, 07:39 PM
  #9  
Teching In
Thread Starter
 
Randy Engler's Avatar
 
Join Date: Apr 2018
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by 91 240
Pro is simple. Standard takes a little work to use the AC Press or EGR sensor
I believe I should be able to connect over serial to the standard unit without wiring into the AC or EGR, but haven't been able to get it working yet.
Randy Engler is offline  
Reply Like
Old 04-11-2018, 10:48 PM
  #10  
TECH Senior Member
iTrader: (25)
 
truckdoug's Avatar
 
Join Date: Nov 2013
Location: Portlandia
Posts: 6,331
Received 526 Likes on 356 Posts

Default
just use the analog output and go through the egr. i've been down this road using the serial output...save yourself the headaches.
truckdoug is offline  
Reply Like
Back to Subforum
Forced Induction
View Next Unread
For the SDCE spring tensioner guys




Advanced Search

All times are GMT -5. The time now is 08:36 PM.