New blowthrough setup
08-13-2017, 12:00 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2011
Location: Pittsburg, Kansas
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
New blowthrough setup 
Finally getting my setup up and running, chasing some issues now but hopefully getting it narrowed down, setup is
04 lq4, 243, ljms stage 3, holly single plane, c&s dual needle and seat e100, msd 6014, crt billet s480, 1.69 glide, ptc 10in nitrous converter in a 86 fox with 4.11s and 28x10.5s
been a best of 5.78@121 so far leaving on 4lbs and ramping to 12, been trying to get it running right again to finally turn it up
08-13-2017, 06:15 PM
#4
On The Tree
Thread Starter
Join Date: Mar 2011
Location: Pittsburg, Kansas
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
The 4.11/28in tall tire kinda kills me for mph, I ran it out the back on only 10lbs total and it went 9.19@146 on the limiter at 7000 8.1 into the run, I've since raised it to 7500 but haven't had a chance to see what it will run
08-25-2017, 05:12 PM
#7
On The Tree
Thread Starter
Join Date: Mar 2011
Location: Pittsburg, Kansas
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Been having some issue, think the converter is toasted, but have a 9.5" billet ptc on the way, can't wait to give it 10 more lbs and see what it will do
Trending Topics
01-27-2018, 12:20 PM
#14
On The Tree
Thread Starter
Join Date: Mar 2011
Location: Pittsburg, Kansas
Posts: 193
Likes: 0
Received 0 Likes
on
0 Posts
Few little upgrades over the winter, some new champion fronts and a motion raceworks parachute setup, ready to see how far in the 8s we can get
