6.0l 408ci stroker
For SaleEngine - Internals
05-03-2024, 08:14 AM | Replies: 8 | Views: 654
-
Price
$1,500• OBO
- Location Grand Forks, ND, 58203, USA
- Condition Used
Description:
All items are used and appear to be in good operating condition
K1 H Beam Forged Rods 6.125" - $300
Wiseco 6394X3 Forged Aluminum Pistons - $800
Unknown Forged Crank With 4" Stroke - $500
One Connecting Rod Seems To Have Got Hot
Crank Spun 2, 3, 4, But Can't Seem To Catch Fingernail On Any Of The Journals. I Believe It Just Needs To Be Polished.
Will Sell Complete Rotating Assembly For $1500 OBO. Buyer Pays Shipping.
#4
Rods
Effect on the rods when " got hot" ? Bent, deformed, get weak? Due to the spoon bearings, do the rods sites on the rods need to be machined or something?
Last edited by Mike Cordero; 05-03-2024 at 07:31 PM. Reason: Make correction
#5
Teching In
Thread Starter
Join Date: May 2019
Location: GRAND FORKS, ND
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#6
ModSquad
iTrader: (6)
The rod that has had heat in it will need to be checked out moreso than the others. These a good chance that it will need to be honed…but then again, all used rods should be checked for roundness and stretch, as well as the rod bolts need to be length checked. It’s a part of buying used rods. No biggie.
#7
ModSquad
iTrader: (6)
The rod that has had heat in it will need to be checked out moreso than the others. These a good chance that it will need to be honed…but then again, all used rods should be checked for roundness and stretch, as well as the rod bolts need to be length checked. It’s a part of buying used rods. No biggie.
Trending Topics
#8
Teching In
Thread Starter
Join Date: May 2019
Location: GRAND FORKS, ND
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
#9
ModSquad
iTrader: (6)