Striped02WS6

iTrader: (6)

just like the title says..i have a cam only 02 WS6 and i need a decently priced good tuner to tune my car...i did a quick search and came up with a guy thats screen name is Gomer but it doesnt look like he has been active here for a while...any help is apprieciated ..thanks guys

Ego Killer

iTrader: (147)

Gomer is an awsome tunner if you can get in touch with him I have his number but haven't talk to him in a while. but he will tune in Huntsville. I have A friend that has hptunners that could get you a decent tune but does not have a dyno

Caspernicus

iTrader: (5)

where do you live?

Robert@SPEEDSOUTH

We custom tune and we're 6 miles south of Birmingham. Let us know if we can help you.

Striped02WS6

iTrader: (6)

thanks for all the replys ..i am currently in iraq with the 101st airborne....my buddy is doing the install in his new garage he built specifically for doing custom installs and fabrication...robert you have a pm waiting on you..thanks for the help!

OMGWTFBODY

iTrader: (5)

That kid with the white camaro can tune it if you have a cam that's not meant for a 408 on nitrous.

Caspernicus

iTrader: (5)

I can still tune it, but there's only so much you can do if
the cam isn't meant for your setup.

99LS1T/A

iTrader: (16)

Both of you need to watch your mouths!!!


Caspernicus,tuned my car and it runs and drives awesome,it's a pretty big cam,and he has the tune pretty much nailed.

Caspernicus

iTrader: (5)

I appreciate it man.

OMGWTFBODY

iTrader: (5)

I hear someone is wandering to a dyno tomorrow.

If I don't get a phone call, I'll get stabby.

And Caspernicus has played with 3 of the cars in this thread.

IMO, his tune is worth every penny. =)

Caspernicus

iTrader: (5)

dude wtf?

The car drives perfectly fine. DD is pretty damn awesome for a cam with
duration in the upper 230's. There are plenty of bigger cams out there too,
not sure what you're getting at...

OMGWTFBODY

iTrader: (5)

Well of course you got it running a hell of a lot better.

My bad.

99LS1T/A

iTrader: (16)

Running better then what? Stock tune? Well,yea a big cam and stock tune runs like crap,it runs really smooth through the whole rpm range now..

Rob,you are now on my "needs to STFU list"..

Sorry to mess up the thread,but OMGWTF doesnt even know much about cammed cars,but Caspernicus does know how to tune them,I dont know how big your cam is,but mine is pretty big(.235 .239 .600 .585 113) and he got it to drive very smooth,and feels great..I had my other T/A tuned by Gomer, so I DO know about good tunes,and Caspernicus can get you a good tune.

Robert@SPEEDSOUTH

"Rob,you are now on my "needs to STFU list".."

Ok...I'm guessing by the way this thread is going that someone else on here is Rob or Robert? Or at least I hope so. All I said is that we tune.

99LS1T/A

iTrader: (16)

Sorry for the mix-up,I was talking to OMGWTFBODY... My bad.

Robert@SPEEDSOUTH

"Sorry for the mix-up,I was talking to OMGWTFBODY... My bad."

Well thats good, I started to think that it was the internet equivalent of a wedgie.

Y'all take it easy, and if you need a reeeaally good tune, let us know.

OMGWTFBODY

iTrader: (5)

Definitely. I just meant that you didn't like the idle of your big cam, but it looks like that got worked out too.

Caspernicus can without a doubt take care of a cammed car at a very reasonable rate.

aerotest

iTrader: (2)

Hey guys,

I am in HSV and have a black 02 Z28 with a few mods, you'll probably see me roming the streets. If you guys are interested I would like to meet up with some other local F body owners to check out some cars and STS. Let me know if you all are interested.

Sorry to hijack the thread.

OMGWTFBODY

iTrader: (5)

www.HSVRacing.com

JDV500

Hello, New member here,

I'm also trying to find a local tuner that can help me get dialed in for my bolt on mods i've done on my 2012, ss. Stubby BBK headers, cold air, cat back Borla. I'm willing to drive out to them anytime, anywhere, just need to know what kind of cost i'm looking at, so i can have it covered.

Thanks in adv, Joe