Columbus, GA
07-19-2010, 07:19 PM
#2361
Physically I'm okay, but I'm not looking forward to stripping the car down.
Both fenders, both quarter panels , and the driver side door are all toast. The passenger side fender took the most damage when I hit the guard rail. I'm pretty sure my frame is bent because my radiator support was crushed and shifted towards the drive side. I drove the car home and it was pulling to the left pretty bad. I'm just not looking forward to swapping all the parts.
I'm still thanking GOD that no one got hurt!!!!!!
I'm still thanking GOD that no one got hurt!!!!!!
07-19-2010, 10:19 PM
#2363
Physically I'm okay, but I'm not looking forward to stripping the car down.
Both fenders, both quarter panels , and the driver side door are all toast. The passenger side fender took the most damage when I hit the guard rail. I'm pretty sure my frame is bent because my radiator support was crushed and shifted towards the drive side. I drove the car home and it was pulling to the left pretty bad. I'm just not looking forward to swapping all the parts.
I'm still thanking GOD that no one got hurt!!!!!!
Both fenders, both quarter panels , and the driver side door are all toast. The passenger side fender took the most damage when I hit the guard rail. I'm pretty sure my frame is bent because my radiator support was crushed and shifted towards the drive side. I drove the car home and it was pulling to the left pretty bad. I'm just not looking forward to swapping all the parts.
I'm still thanking GOD that no one got hurt!!!!!!
07-20-2010, 06:54 AM
#2365
http://www.thirdgen.org/techboard/ca...2-z28-l98.html
Last edited by zz17iroc; 07-20-2010 at 07:03 AM. Reason: insert link
07-20-2010, 09:35 PM
#2370
Got back two hours ago from the test drive, I was so excited I forgot to take some pics. But the car looks the same as photos in the link above. The car should be in my drive way no later than Saturday. The only problem I had with car was when I stepped on the gas it felt like I was going in slow motion LOL. That will change shortly!!!!!!! It's a very clean car and I kinda don't want to touch it, but it's still just a car.
07-20-2010, 09:44 PM
#2371
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
What happened to the phone call? I need a 40 amp fuse and holder, a small eyelet connector, and then tuck a few other wires into the flex tube. Then I need to do the line lock and the underhood wiring will be done. Then I got to wire in the switch panel and install the bottle mount and the inside will be done. Went to the parts store and couldn't find a weather tight fuse connector. Guess I will have to look online. Don't like all the crap that needs to be wired up for the linelock so I will wire it up like the slp linelock on the 97 I think.
07-21-2010, 02:24 AM
#2373
11 Second Club
iTrader: (1)
Join Date: Jan 2010
Location: Scholfield Barracks, HI
Posts: 88
Likes: 0
Received 0 Likes
on
0 Posts
that looks like a really nice car there Craig...good find....just do what i did when i got robbed and make the best of this.....hopefully you can get enough insurance money to work on the next step in your engine build as well...but yeah man...if you ever need any help just let me know...i'll turn some wrenches for ya to help you get back on the road...
07-21-2010, 07:07 AM
#2374
What happened to the phone call? I need a 40 amp fuse and holder, a small eyelet connector, and then tuck a few other wires into the flex tube. Then I need to do the line lock and the underhood wiring will be done. Then I got to wire in the switch panel and install the bottle mount and the inside will be done. Went to the parts store and couldn't find a weather tight fuse connector. Guess I will have to look online. Don't like all the crap that needs to be wired up for the linelock so I will wire it up like the slp linelock on the 97 I think.
You call on my cell any time tomorrow
that looks like a really nice car there Craig...good find....just do what i did when i got robbed and make the best of this.....hopefully you can get enough insurance money to work on the next step in your engine build as well...but yeah man...if you ever need any help just let me know...i'll turn some wrenches for ya to help you get back on the road...
07-23-2010, 09:22 PM
#2379
TECH Enthusiast
iTrader: (11)
Join Date: Nov 2004
Location: columbus GA
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Craig, Call me when your free tomorrow. I will be here this weekend and want to get the car done. Bring whatever you think we'll need. If I can get it to where it needs the bung done and skill shop stuff then I will be happy.
07-23-2010, 11:06 PM
#2380
TECH Enthusiast
iTrader: (4)
Join Date: Apr 2008
Location: Home town Clive,IA current town FORT BENNING GEORGIA
Posts: 525
Likes: 0
Received 0 Likes
on
0 Posts
well guys it was nice to meet you guys, it'll be great to actually bring my car out... it seems i missed a black cts out there oh well theres always next week...
outlaw is this rumor about you tuning true.... DO YOU?
outlaw is this rumor about you tuning true.... DO YOU?