Columbus, GA
Is your wife's TBSS black by chance? I think I have seen you around. I've seen 2 black and 1 white TBSS on post.
I got my oil sending unit today and finished putting the intake back in. Took her for a test drive and definately need to get something on my headers. The idle is all funky. running anywhere between 1000-1500 rpms. if the idle was lower rpms i would almost say it sounds like a nice cam, lol. i'm hoping its just the O2 sensors though and not something else. Also, i'm not sure if its just me but the car feels slower now. i think it might just be the slow "buzz" and rattling thats going on in the inside of the car, lol, makes it seems like it's going slower than it is. I guess we'll find out on Friday.
and on a side note. my door locks are acting funny. they both unlock just fine using the door unlock switch. but they only lock when you hit the switch every so often. I found this out because i was trying to reprogram my key fob (which didn't work btw). When i cycle the ignition the drivers door locks and unlocks the but passenger door just stays locked but makes the "click" sound. I'm pretty sure the fact that my key fob won't program is because the passenger door lock isn't unlocking like its supposed to when i cycle the ignition. but i'm not sure. any input?
and on a side note. my door locks are acting funny. they both unlock just fine using the door unlock switch. but they only lock when you hit the switch every so often. I found this out because i was trying to reprogram my key fob (which didn't work btw). When i cycle the ignition the drivers door locks and unlocks the but passenger door just stays locked but makes the "click" sound. I'm pretty sure the fact that my key fob won't program is because the passenger door lock isn't unlocking like its supposed to when i cycle the ignition. but i'm not sure. any input?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Well, looks like ford isn't messing around with this new 5.0 or v6 for that matter. There should defianantly be a steady supply of mustang challengers now. Weather tonight at 1 am was 65 degrees, great horsepower weather. CancerJCC, I have hptuners and will be working on my tune, along with help from zz17iroc. Your best bet is to work something out with him. I have been to a shop that is up the road and was not happy with the tune. You can't work on a previous tune and be done in under 5 minutes. Keep in mind that I paid full price too. Grease, if it feels sluggish down low, once you get the y on there, tune, and good exhaust you will be alot happier.
Last edited by sheikss; Mar 31, 2010 at 02:53 AM.
Yes sir it is....have you seen it around? lol I went cruising on veterans park a couple of times...you might have seen it then maybe?
I guess I haven't seen you around then.
You ain't kidding....I've always kind of been a Ford guy and now with these new Mustangs i'm happy as hell. The only reason I opted for a camaro over a mustang was the power, lol. guess my next ride will be a Mustang...haha...maybe anyways. I'm kind of fond of the Taraus SHO myself although the price is outrageous.
And as for the exhaust that's what I'm thinking too. The Y with a muffler should help the low end out.
Well, looks like ford isn't messing around with this new 5.0 or v6 for that matter. There should defianantly be a steady supply of mustang challengers now. Weather tonight at 1 am was 65 degrees, great horsepower weather. CancerJCC, I have hptuners and will be working on my tune, along with help from zz17iroc. Your best bet is to work something out with him. I have been to a shop that is up the road and was not happy with the tune. You can't work on a previous tune and be done in under 5 minutes. Keep in mind that I paid full price too. Grease, if it feels sluggish down low, once you get the y on there, tune, and good exhaust you will be alot happier.
And as for the exhaust that's what I'm thinking too. The Y with a muffler should help the low end out.
Yes sir it is....have you seen it around? lol I went cruising on veterans park a couple of times...you might have seen it then maybe?
I guess I haven't seen you around then.
You ain't kidding....I've always kind of been a Ford guy and now with these new Mustangs i'm happy as hell. The only reason I opted for a camaro over a mustang was the power, lol. guess my next ride will be a Mustang...haha...maybe anyways. I'm kind of fond of the Taraus SHO myself although the price is outrageous.
And as for the exhaust that's what I'm thinking too. The Y with a muffler should help the low end out.
I guess I haven't seen you around then.
You ain't kidding....I've always kind of been a Ford guy and now with these new Mustangs i'm happy as hell. The only reason I opted for a camaro over a mustang was the power, lol. guess my next ride will be a Mustang...haha...maybe anyways. I'm kind of fond of the Taraus SHO myself although the price is outrageous.
And as for the exhaust that's what I'm thinking too. The Y with a muffler should help the low end out.
Originally Posted by OUTLAWZ RACING
Is your Z white by any chance?
Yes sir it is....have you seen it around? lol I went cruising on veterans park a couple of times...you might have seen it then maybe?
Quote:
Yeah I was in a c6zo6 that I just put exhaust and cam in awhile back, Brother your z is loud lmao me and the customer where like WTF? Hpoe fully by next month Ill have gas so I can do custom exhaust and finsh these turbo kits lol. My current welder is a pos it finally went.
Is your Z white by any chance?
Yes sir it is....have you seen it around? lol I went cruising on veterans park a couple of times...you might have seen it then maybe?
Quote:
Yeah I was in a c6zo6 that I just put exhaust and cam in awhile back, Brother your z is loud lmao me and the customer where like WTF? Hpoe fully by next month Ill have gas so I can do custom exhaust and finsh these turbo kits lol. My current welder is a pos it finally went.
Yeah I was in a c6zo6 that I just put exhaust and cam in awhile back, Brother your z is loud lmao me and the customer where like WTF? Hpoe fully by next month Ill have gas so I can do custom exhaust and finsh these turbo kits lol. My current welder is a pos it finally went.
yeah, the fast toys lid, i ordered their ram air kit too but it's on back order, should ship out next week.
so i took my car to Autozone and then the tire shop to get my DR's put on. And man is my car running like ****. Idle surge, backfires, bogging, etc. lol I'm thinking it's just the O2 sensors since i haven't gotten the Y yet and so they're open. I checked for vaccum leaks and there was no problem there. i'm pretty sure my spark plugs are good (I haven't checked them yet...waiting to see if the Y fixes it first). but yeah, it was pretty embarassing driving on Buena Vista with open headers with my engine backfiring, lol. I got the codes checked at autozone and it was only throwing the EGR and both rear O2 codes which is obvious. nothing else though so i'm hoping it's just the open headers messing with the front O2s.
Hi all, new to the site but not to columbus, been here for about 3 and a half years but spent a majority of that Deployed. Drive a 1994 Trans am/A4 Dark teal metallic with a very few mods for now. See alot of F Bodies out and about pretty much everyday, would enjoy meeting some more cool car people. Is there a usual hangout or meeting?