Speed Engineering Garage Sale
#1
Speed Engineering Garage Sale
-Stock LS1 Motor w/Heads approx. 30,000 miles In great condition. Not very many hard miles.
=1300.00
-2002 T56 Trany w/Spec Stage II Clutch 30,000 Miles
=1450.00
-Brand New Slicks pair of -26/11.50/16 =175.00 (pair)
&-26/11.50/15 =175.00 (pair) (Sold)
-Spec Stage III Clutch w/Billet flywheel & I upgrade 1000 Miles 500 were ez break in miles. Around 20 Passes with a head and camed LS1. Great Cond.
=500.00
-Whipple Updated Computer & full wiring harness. Sells for over 800.00
=375.00
-5.3L Forged Ross pistons built for stock heads & crank w/6.125 length rods.
Total compression comes out to 8.2:1 (8,000 miles) Good cond also.
=300.00
-5.3L bare block around 20,000 original miles. Machined for Ross Pistons. Little bit of surface rust.
=300.00
-Pro-5.0 Shifter 1000 Miles (Sold)
=125.00
-Yank 3600 Stall converter LS1 corvette (Brand New)
=450.00
=1300.00
-2002 T56 Trany w/Spec Stage II Clutch 30,000 Miles
=1450.00
-Brand New Slicks pair of -26/11.50/16 =175.00 (pair)
&-26/11.50/15 =175.00 (pair) (Sold)
-Spec Stage III Clutch w/Billet flywheel & I upgrade 1000 Miles 500 were ez break in miles. Around 20 Passes with a head and camed LS1. Great Cond.
=500.00
-Whipple Updated Computer & full wiring harness. Sells for over 800.00
=375.00
-5.3L Forged Ross pistons built for stock heads & crank w/6.125 length rods.
Total compression comes out to 8.2:1 (8,000 miles) Good cond also.
=300.00
-5.3L bare block around 20,000 original miles. Machined for Ross Pistons. Little bit of surface rust.
=300.00
-Pro-5.0 Shifter 1000 Miles (Sold)
=125.00
-Yank 3600 Stall converter LS1 corvette (Brand New)
=450.00
Last edited by Speed Engineering; 08-22-2004 at 08:40 PM.