Jet-Hot Header GP
#1
Teching In
Thread Starter
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Jet-Hot Header GP
Jet-Hot now has it's own header for LS1 F-bodies! Here are the specs:
1 3/4" primaries, long tube, 3" slip on collector
16 gauge tubes, 3/8" thick flange.
Flange is a one-piece, completely flat design, not the "protruding tube" style.
They have EGR & AIR accomodations designed around the 98-99 models.
O2 bungs are welded in the collectors.
Paper type gaskets & standard bolts are included.
Headers double coated in & out with Jet-Hot Sterling finish, so Lifetime rust-through warranty applies.
Headers are made in the U.S. of A., so the welds and tubes are of the highest quality. No cheap stuff.
Price is $511 including shipping & handling within the 48 states. Jet-Hot is offering a 2 payment plan at no additional cost as well. Basically you pay 1/2 when you order, and the credit card is billed the other 1/2 30 days later.
I don't have any pictures yet, but should within a week or so. Our prototype was sent off to get photographed to appear in GM High Tech Performance magazine, otherwise I'd snap a shot myself.
We have 25 that will be showing up in our Arizona facility tomorrow, so they can be shipped by the end of the week. If you have any questions please email me or call 800-432-3379 x112.
Thanks
Todd
1 3/4" primaries, long tube, 3" slip on collector
16 gauge tubes, 3/8" thick flange.
Flange is a one-piece, completely flat design, not the "protruding tube" style.
They have EGR & AIR accomodations designed around the 98-99 models.
O2 bungs are welded in the collectors.
Paper type gaskets & standard bolts are included.
Headers double coated in & out with Jet-Hot Sterling finish, so Lifetime rust-through warranty applies.
Headers are made in the U.S. of A., so the welds and tubes are of the highest quality. No cheap stuff.
Price is $511 including shipping & handling within the 48 states. Jet-Hot is offering a 2 payment plan at no additional cost as well. Basically you pay 1/2 when you order, and the credit card is billed the other 1/2 30 days later.
I don't have any pictures yet, but should within a week or so. Our prototype was sent off to get photographed to appear in GM High Tech Performance magazine, otherwise I'd snap a shot myself.
We have 25 that will be showing up in our Arizona facility tomorrow, so they can be shipped by the end of the week. If you have any questions please email me or call 800-432-3379 x112.
Thanks
Todd
#6
TECH Resident
Join Date: Nov 2001
Location: the third rock from the sun!
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
Just ordered mine. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Two pay plan...woohoo! <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
Should go nicely with a true dual setup don't 'cha think?! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> Nice talking to ya Todd! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ November 22, 2002, 03:23 AM: Message edited by: WEASEL ]</small>
Should go nicely with a true dual setup don't 'cha think?! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> Nice talking to ya Todd! <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ November 22, 2002, 03:23 AM: Message edited by: WEASEL ]</small>
Trending Topics
#8
TECH Apprentice
Join Date: Apr 2002
Location: Hickory, NC
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
Todd:
I applaud you guys for taking the time to survey and get feedback on what potential customers want in a long tube header; however, I see no mention of a "complete" kit including Y-pipe.
To be more specific, I can't even begin to count the number of individuals who replied to the survey who need a y-pipe with cats. Please tell me you will be offering a Y-pipe with cat. converters.
I applaud you guys for taking the time to survey and get feedback on what potential customers want in a long tube header; however, I see no mention of a "complete" kit including Y-pipe.
To be more specific, I can't even begin to count the number of individuals who replied to the survey who need a y-pipe with cats. Please tell me you will be offering a Y-pipe with cat. converters.
#10
Teching In
Thread Starter
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
I've got a couple post to respond to here...
1. I'll get pics up as soon as I can.
2. These headers are compatible with the Hooker off road ypipe. That's the short-term solution. I've just started working on the cat issue as many have brought it up. Jet-Hot doesn't really want to get into the issue of emissions certification, so we're looking at what options are out there. At any rate, your voice is heard and we're working on it.
1. I'll get pics up as soon as I can.
2. These headers are compatible with the Hooker off road ypipe. That's the short-term solution. I've just started working on the cat issue as many have brought it up. Jet-Hot doesn't really want to get into the issue of emissions certification, so we're looking at what options are out there. At any rate, your voice is heard and we're working on it.
#13
TECH Resident
Join Date: Nov 2001
Location: the third rock from the sun!
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by justin sutton:
<strong>Talked to Todd today.Alot of help.I will be ordering a set asap.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Justin...sent you email!
<strong>Talked to Todd today.Alot of help.I will be ordering a set asap.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Justin...sent you email!
#15
TECH Enthusiast
Re: Jet-Hot Header GP
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by JetHotTodd:
<strong>Jet-Hot doesn't really want to get into the issue of emissions certification</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> , say what? They couldn't be emissions certified even if you wanted to, because they change the location of the cats. So forget about certification. That's not why people want them anyway. They want them to pass a sniffer test, or a lax visual inspection, or maybe they have a little tree hugger in them, or in my case I like the sound better, they kill the rasp.
Lots of people waiting on this option, I'd venture to say none of them are waiting for or expecting any sort of certification.
<small>[ November 22, 2002, 08:00 AM: Message edited by: Dave Carney ]</small>
<strong>Jet-Hot doesn't really want to get into the issue of emissions certification</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif"><img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" /> , say what? They couldn't be emissions certified even if you wanted to, because they change the location of the cats. So forget about certification. That's not why people want them anyway. They want them to pass a sniffer test, or a lax visual inspection, or maybe they have a little tree hugger in them, or in my case I like the sound better, they kill the rasp.
Lots of people waiting on this option, I'd venture to say none of them are waiting for or expecting any sort of certification.
<small>[ November 22, 2002, 08:00 AM: Message edited by: Dave Carney ]</small>
#18
Teching In
Thread Starter
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
I wanted to let you know that we did sell the first run of these. Response has been good, and I thank you all for your business. As such we are going to extend this price through close of business(7pm ET) on Wednesday, 11/27/02.
If you have any questions please feel free to email or call me.
Thanks
Todd
800-432-3379x112
If you have any questions please feel free to email or call me.
Thanks
Todd
800-432-3379x112
#20
Teching In
Thread Starter
Join Date: Aug 2002
Location: Bridgeport, PA
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Re: Jet-Hot Header GP
First off, I finally got some headers to take photos of today. They're not on jet-hot.com yet, so if you want them, email me and I'll send them over.
Second, I have had requests for these headers without AIR & EGR connections. We are taking names and email addresses of those interested. If there is sufficient interest we will build them on the next production run. Let me know.
Third, we are working on LT1 headers, but they probably won't be ready for 4-8 weeks. I had no plans of putting AIR & EGR connections in them. If people are interested, now would be a good time to speak up.
Second, I have had requests for these headers without AIR & EGR connections. We are taking names and email addresses of those interested. If there is sufficient interest we will build them on the next production run. Let me know.
Third, we are working on LT1 headers, but they probably won't be ready for 4-8 weeks. I had no plans of putting AIR & EGR connections in them. If people are interested, now would be a good time to speak up.