Cam Clearance sale - new and used
11-26-2002, 12:34 AM
#1
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Cam Clearance sale - new and used We have several cams that we have used for testing, or that we ordered and just put on the Cam Doctor that we are clearing off the shelf to make room for more cams.
There are only one of most of these cams, so first come, first serve. All cams will come with a cam card from our Cam Pro Plus stating the exact cam specs.
- Thunder Racing 224/224 .561/.561 114lsa + 2 degrees advance (these cams normally come with 4 degrees adv. ground in). NEW $375
- Thunder Racing 219/219 .576/.576 112lsa + 4 degrees advance NEW $375
- SOLD Thunder Racing 224/224 .561/.561 112lsa +4 degrees advance USED $325
- Comp XE-R 230/230 .592/.592 110lsa + 0 degrees advance NEW $375
- SOLD Cam Motion 227/227 .574/.574 114lsa + 4 degrees advance NEW $375
- Lunati "T1" 221/221 .558/.558 112lsa + 4 degrees advance NEW $375
To order any of these cams, please give Paul, David, Chris or Angie a call at 877-516-7223.
www.thunderracing.com
There are only one of most of these cams, so first come, first serve. All cams will come with a cam card from our Cam Pro Plus stating the exact cam specs.
- Thunder Racing 224/224 .561/.561 114lsa + 2 degrees advance (these cams normally come with 4 degrees adv. ground in). NEW $375
- Thunder Racing 219/219 .576/.576 112lsa + 4 degrees advance NEW $375
- SOLD Thunder Racing 224/224 .561/.561 112lsa +4 degrees advance USED $325
- Comp XE-R 230/230 .592/.592 110lsa + 0 degrees advance NEW $375
- SOLD Cam Motion 227/227 .574/.574 114lsa + 4 degrees advance NEW $375
- Lunati "T1" 221/221 .558/.558 112lsa + 4 degrees advance NEW $375
To order any of these cams, please give Paul, David, Chris or Angie a call at 877-516-7223.
www.thunderracing.com
11-26-2002, 05:02 AM
#3
TECH Fanatic
Re: Cam Clearance sale - new and used Well, I purchased a TR-220 from you already, but that 219/219 .576/.576 112lsa + 4 degrees advance cam may be the real sweetheart of the whole group.
Fairly low duration with lotsa lift and 4 degrees advance. The sometimes poor idle of a 112 LSA would be calmed way down by this cams lower duration and good "under the curve" characteristics of a cam with high lift. A very "torquey" cam to say the least that would pull [real] hard to a comfortable 6,200 rpm. Great street cam for a daily driver!
If anyone here buys it, you really need to come back and let us know how this camshaft works out. This is NOT a dyno queen cam... This is a [great] street cam!
Very interesting indeed....
Just my opinion.... <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Ron,
________________________________________________
<small>[ November 26, 2002, 05:39 AM: Message edited by: Kimchee and Rice ]</small>
Fairly low duration with lotsa lift and 4 degrees advance. The sometimes poor idle of a 112 LSA would be calmed way down by this cams lower duration and good "under the curve" characteristics of a cam with high lift. A very "torquey" cam to say the least that would pull [real] hard to a comfortable 6,200 rpm. Great street cam for a daily driver!
If anyone here buys it, you really need to come back and let us know how this camshaft works out. This is NOT a dyno queen cam... This is a [great] street cam!
Very interesting indeed....
Just my opinion.... <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Ron,
________________________________________________
<small>[ November 26, 2002, 05:39 AM: Message edited by: Kimchee and Rice ]</small>
11-26-2002, 05:22 AM
#4
TECH Fanatic
Re: Cam Clearance sale - new and used Jason....
BTW, any chance you folks can cut a deal on those Thunder Racing head plates?
Hey, it's a walking billboard for you guys. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Maybe 10 bucks off or better? I am getting rid of my EGR when the LS6 intake is installed and am looking for a head plate since that part of the head will not be covered up.
How bout it?
Ron,
BTW, any chance you folks can cut a deal on those Thunder Racing head plates?
Hey, it's a walking billboard for you guys. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Maybe 10 bucks off or better? I am getting rid of my EGR when the LS6 intake is installed and am looking for a head plate since that part of the head will not be covered up.
How bout it?
Ron,
11-27-2002, 01:52 PM
#5
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used Also, we have a G5 cam for sale - USED $375
Ron, check your mail later.
<small>[ November 27, 2002, 01:52 PM: Message edited by: Jason99T/A ]</small>
Ron, check your mail later.
<small>[ November 27, 2002, 01:52 PM: Message edited by: Jason99T/A ]</small>
Trending Topics
11-28-2002, 09:10 PM
#8
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by justin sutton:
<strong>Jason do you still have the 224 +4?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yes, that cam is still for sale. Give one of the salesmen a call tomorrow to purchase it.
<strong>Jason do you still have the 224 +4?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Yes, that cam is still for sale. Give one of the salesmen a call tomorrow to purchase it.
11-30-2002, 11:31 PM
#11
Staging Lane
Join Date: Nov 2002
Location: The Colony, Texas
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used What will i have to do to get that G5 cam to work on my automatic? I have a bone stock 2000 Z28.
<small>[ November 30, 2002, 11:34 PM: Message edited by: Erfan Z28 ]</small>
<small>[ November 30, 2002, 11:34 PM: Message edited by: Erfan Z28 ]</small>
12-01-2002, 08:41 PM
#12
TECH Apprentice
iTrader: (4)
Join Date: Nov 2001
Location: lebanon, ohio
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used Is the 230 XE-R still available? If I get the chance to I'll be giving you guys a call monday to ask some questions about it...
12-01-2002, 09:54 PM
#13
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Erfan Z28:
<strong>What will i have to do to get that G5 cam to work on my automatic? I have a bone stock 2000 Z28.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You will need to change the valvesprings and pushrods at a bare minimum. Titanium retainers would be a good upgrade as well. You may need some computer tuning to get the idle where you need it, but I know of a few people who just drill out their TB hole and this takes care of the idle problem.
<strong>What will i have to do to get that G5 cam to work on my automatic? I have a bone stock 2000 Z28.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You will need to change the valvesprings and pushrods at a bare minimum. Titanium retainers would be a good upgrade as well. You may need some computer tuning to get the idle where you need it, but I know of a few people who just drill out their TB hole and this takes care of the idle problem.
12-12-2002, 12:41 AM
#16
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used Will the 219/219 .576/.576 112+4* work well on an A4? And how about with use on soon to be DP nitrous (300hp) new NX kit, too much cylinder pressure? Daily driver pretty much, will have MAF-T soon. TIA.
Charlie.
Charlie.
12-26-2002, 10:38 PM
#17
Staging Lane
Join Date: Nov 2002
Location: The Colony, Texas
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used Jason,
I want to buy that COMP XE-R 230/230 ASAP. Please email me at erfan35@attbi.com and tell me what else I would need with it.
Thanks
Erfan
I want to buy that COMP XE-R 230/230 ASAP. Please email me at erfan35@attbi.com and tell me what else I would need with it.
Thanks
Erfan
12-26-2002, 11:58 PM
#19
TECH Resident
Join Date: Dec 2001
Location: Baton Rouge, LA
Posts: 918
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used How would that 219 cam do in a 5.3h/c ls1 in a truck? <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />
01-24-2003, 12:45 AM
#20
I can shift faster than you.
Thread Starter
iTrader: (21)
Join Date: Nov 2001
Location: Baton Rouge, LA
Posts: 5,133
Likes: 0
Received 0 Likes
on
0 Posts
Re: Cam Clearance sale - new and used ttt..
The 219 cam would be a little big for my tastes in a 5.3l, but it would be cool to try. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
The 219 cam would be a little big for my tastes in a 5.3l, but it would be cool to try. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />