ls1 gta vs mustang 5.8
#1
ls1 gta vs mustang 5.8
came at the hands of a 1990 mustang.
his car....
1990 mustang
351w
gt40 heads
520 lift cam
1.60 roller rockers
long tube headers
edelbrock intake
650 holly carb
no ac, power steering
5spd
8.8 rear with 3.73's
drag radials
car weight under 3000
My car
1988 Trans am GTA 02 ls1/t56
underdrive pulley | ls6 intake | Ford 9" W/ lockr 4.11s |Port & Polish TB| SLP Loud mouth | K&N intake | Hurst shifter | 1" drop eibach springs| kyb shocks| Wilwood 4 piston disc brakes/ rotors | subframe connects | tubular lower control arms | edelbrock torque arm and panhard bar | bmt shock tower brace | hellwig sway bar | Stock 16" wheels with Toyo RA1 tires
hes my land lords sun, sent me a message online, we met at staples, check each others cars out, then headed to mexico
we lined up, i spun, he hooked, he kept me back a few cars till the end, i couldnt catch him and he didnt pull on me, just a bad launch, i told him good race and told him next time ill have my headers and dr's on
his car....
1990 mustang
351w
gt40 heads
520 lift cam
1.60 roller rockers
long tube headers
edelbrock intake
650 holly carb
no ac, power steering
5spd
8.8 rear with 3.73's
drag radials
car weight under 3000
My car
1988 Trans am GTA 02 ls1/t56
underdrive pulley | ls6 intake | Ford 9" W/ lockr 4.11s |Port & Polish TB| SLP Loud mouth | K&N intake | Hurst shifter | 1" drop eibach springs| kyb shocks| Wilwood 4 piston disc brakes/ rotors | subframe connects | tubular lower control arms | edelbrock torque arm and panhard bar | bmt shock tower brace | hellwig sway bar | Stock 16" wheels with Toyo RA1 tires
hes my land lords sun, sent me a message online, we met at staples, check each others cars out, then headed to mexico
we lined up, i spun, he hooked, he kept me back a few cars till the end, i couldnt catch him and he didnt pull on me, just a bad launch, i told him good race and told him next time ill have my headers and dr's on
#7
yea, i think i could of beaten him with slicks, ive got a set of stainless works long tubes in the garage ill be throwing on with a 4" cutout, that should take car of him, ill have to find a set of slicks before then to, i invited him to the track on the 15th but he has to work, so after i run on the 15th the headers and cutout go on, then ill run him at the track.
Ive been thinking about n20, but i want to keep it n/a with this guy, he;s a friend, and i think he would know lol
Trending Topics
#14
haha theyre ok for a budget built bolt on 302, even then a port does wonders
but on a 351 theyre choking it like you wouldnt believe; even a box stock set of afrs or comparable would make it a new car
but on a 351 theyre choking it like you wouldnt believe; even a box stock set of afrs or comparable would make it a new car
#19