Street Racing & Kill Stories Basic Technical Questions & Advice

600 GSXR vs Mach 1 vs LS1 SS

Thread Tools
 
Search this Thread
 
Old 04-15-2009 | 09:57 PM
  #1  
lxh89's Avatar
Thread Starter
Teching In

 
Joined: Jan 2006
Posts: 16
Likes: 0
From: Pearland, Tx
Default 600 GSXR vs Mach 1 vs LS1 SS

On my home from work around 7pm, I spot a silver Camaro SS rolling in behind me merging onto the beltway. I exit to the feeder and he follows and ends up to my right at the light at the first intersection. We're both about 3-4 cars back from the light, so need to get clear before any fun starts. Im sitting there wondering if he's going want some action as I see him eyeing my car over.

Light goes green, traffic in front of us opens up allowing me to navigate around and get to a clear section of road. He doesn't aggressively pursue, but stays close enough to keep me in his sight.

Approaching the next intersection, light goes yellow as I approach in the lead. I stop for the light. Glancing in my passenger side mirror, I see the SS rolling in to the right lane as I sit in the center lane at the light. As I'm looking over at his car, a silver/black GSXR 600 pulls up on my left.

The rider on the bike throws some revs at me and the camaro. He lurches forward a few times as cross traffic passes in front of us. I remain quiet in my car keeping a close eye on the cross signal waiting for it to go yellow. The camaro to my right lightly taps his throttle to signal the bike he wants some.

The bike starts bringing his revs up as does the camaro. I continue to sit there patiently with my idle bouncing, car shaking just waiting for the light.

Cross light goes Red and my heart is racing with anticipation. Our light goes green and the bike immediately has a car on me while the camaro is a half-car out on me and pulling away. I'm easing the clutch out trying to keep tire spin down in 1st, but it comes on anyway so I short-shift to 2nd so I can go WOT. My drag radials are warm but not sticky from my drive home so I'm hoping they'll grab.

I hit 2nd gear, pound the loud pedal and starting reeling in the camaro. As I shift into 3rd and start winding it up, I pass the camaro and get alongside the bike. I hit 4th and the bike and camaro are fading in my rear view mirrors. I shut it down in the upper rpms of 4th as its no longer a race, but them chasing me down.

Since I've got my car on "street" mode, it's actually in conservative, 93-octane safe mode, so I was quite surprised to take down that half-pint crotch-rocket. The camaro made a noble effort with a strong hole-shot, but ultimately lost the horsepower war on the top-end.

Thumbs up to both guys. Definitely been a while since I got to play!

In case you're all wondering, my car dynoed at 600rwhp SAE w/ ~15psi boost through a 6-spd manual. That's my "street" trim.

Tony
Old 04-15-2009 | 10:07 PM
  #2  
Stopsign32v's Avatar
Tech Apprentice

iTrader: (1)
 
Joined: Dec 2006
Posts: 191
Likes: 0
Default

Theres no excuse for a race like this not to be on video! Shame......shame on you
Old 04-15-2009 | 10:15 PM
  #3  
corysmach1's Avatar
Teching In

 
Joined: Jul 2006
Posts: 46
Likes: 0
Default

******* awsome.
Old 04-16-2009 | 08:28 AM
  #4  
02ws666's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2009
Posts: 571
Likes: 0
From: Dallas
Default

at first i thought your car was a bolt on mach 1 and i was going to throw the bs flag.. then i saw your mods, and gasped... haha nice kills
Old 04-16-2009 | 08:47 AM
  #5  
dgr00s's Avatar
Staging Lane
 
Joined: May 2007
Posts: 76
Likes: 0
From: sc
Default

nice, your car sounds awesome... like was said a video would be even more awesomer, ha.
Old 04-16-2009 | 09:13 AM
  #6  
Turrry's Avatar
Staging Lane
 
Joined: Aug 2006
Posts: 88
Likes: 0
Default

Wow....let me just say that if/when I encounter a Mach 1, I hope it's not one set up like yours....

nice work man.
Old 04-16-2009 | 09:38 AM
  #7  
TXZ28LS1's Avatar
TECH Senior Member

iTrader: (5)
 
Joined: Mar 2004
Posts: 6,164
Likes: 1
From: Classified
Default

Originally Posted by 02ws666
at first i thought your car was a bolt on mach 1 and i was going to throw the bs flag.. then i saw your mods, and gasped... haha nice kills


lol!! same here!! i was like no way, then i saw the sig.. good kill.

Trending Topics

Old 04-16-2009 | 10:21 AM
  #8  
02ws666's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2009
Posts: 571
Likes: 0
From: Dallas
Default

ya a nicely equiped bolt on Mach1 will get slowly, and i mean slowly, walked by a bolt on fbod. i raced one with headers, cutouts, a tune, CAI, 4.10's, and 315 MT's... and it was even till end of third when i started inchin away...plus i was granny shifting
Old 04-16-2009 | 11:24 AM
  #9  
DiscerningZ32's Avatar
TECH Regular
 
Joined: Jun 2008
Posts: 476
Likes: 0
Default

Damn OP, your mach looks stout as hell! Sweet ride

Good kill as well...

__________________________________________________ ________________________________________
Old 04-16-2009 | 12:31 PM
  #10  
ponygt65's Avatar
TECH Apprentice
 
Joined: Aug 2006
Posts: 335
Likes: 0
From: CA
Default

Originally Posted by 02ws666
at first i thought your car was a bolt on mach 1 and i was going to throw the bs flag.. then i saw your mods, and gasped... haha nice kills
Yep...Tony's Mach isn't necessarily the normal though...ROFL. He knows his ****.
Originally Posted by Turrry
Wow....let me just say that if/when I encounter a Mach 1, I hope it's not one set up like yours....

nice work man.
See above.
Originally Posted by 02ws666
ya a nicely equiped bolt on Mach1 will get slowly, and i mean slowly, walked by a bolt on fbod. i raced one with headers, cutouts, a tune, CAI, 4.10's, and 315 MT's... and it was even till end of third when i started inchin away...plus i was granny shifting
Did you really need to go there?...I mean seriously. Come one man. Let's NOT make this thread into a **** storm PULEASE.



Tony - I'm shocked...I mean...it took you till 3rd to pass that Bike. I've seen better from you man. Good to see you post a kill.
Old 04-16-2009 | 12:37 PM
  #11  
ballhawkdawk's Avatar
On The Tree

 
Joined: Nov 2007
Posts: 199
Likes: 0
From: West Chester, PA
Default

Originally Posted by 02ws666
ya a nicely equiped bolt on Mach1 will get slowly, and i mean slowly, walked by a bolt on fbod. i raced one with headers, cutouts, a tune, CAI, 4.10's, and 315 MT's... and it was even till end of third when i started inchin away...plus i was granny shifting
I don't think the OP is worried about any NA bolt-on V8s.
Old 04-16-2009 | 12:50 PM
  #12  
00silverGTP's Avatar
TECH Apprentice

iTrader: (3)
 
Joined: Jan 2006
Posts: 342
Likes: 0
From: Ohio
Default

ss driver couldn't drive.......

sound like a sweet car, any vids of it.
Old 04-16-2009 | 12:57 PM
  #13  
ponygt65's Avatar
TECH Apprentice
 
Joined: Aug 2006
Posts: 335
Likes: 0
From: CA
Default

Originally Posted by 00silverGTP
ss driver couldn't drive.......

sound like a sweet car, any vids of it.
Sarcasm much?

Old 04-16-2009 | 01:20 PM
  #14  
02ws666's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2009
Posts: 571
Likes: 0
From: Dallas
Default

Originally Posted by ponygt65
Did you really need to go there?...I mean seriously. Come one man. Let's NOT make this thread into a **** storm PULEASE.
ya my bad, just relaying an experience i had. dont want to start ne thing

Originally Posted by ballhawkdawk
I don't think the OP is worried about any NA bolt-on V8s.
ya i guess thats true.

stout car OP
Old 04-16-2009 | 01:50 PM
  #15  
01350ta's Avatar
On The Tree
 
Joined: Jan 2008
Posts: 124
Likes: 0
From: South Australia
Default

Sounds like it was a fun race. Good kill.
Old 04-16-2009 | 01:51 PM
  #16  
Johnnystock's Avatar
TECH Addict
10 Year Member
iTrader: (6)
 
Joined: Feb 2007
Posts: 2,675
Likes: 38
From: Canada
Default

Thats a crazy setup you have my friend!! You can afford to short shift and still win easy with the power tou have!
Old 04-16-2009 | 02:41 PM
  #17  
PNYKLR-TA's Avatar
12 Second Club
iTrader: (1)
 
Joined: Mar 2008
Posts: 847
Likes: 0
From: North Phoenix, AZ
Default

Originally Posted by Johnnystock
Thats a crazy setup you have my friend!! You can afford to short shift and still win easy with the power tou have!
yea short shifting a 600rwhp car is like redlining/slamming a 400rwhp car at least haha!

sounds like a stout *** ride you got man, any pictures for us to over ?????

PLEASE!?
Old 04-16-2009 | 04:12 PM
  #18  
lxh89's Avatar
Thread Starter
Teching In

 
Joined: Jan 2006
Posts: 16
Likes: 0
From: Pearland, Tx
Default

Here's some pics...





Here's a view from the crotch-rocket & Camaro SS:



Tony
Old 04-16-2009 | 05:12 PM
  #19  
rocksws6's Avatar
TECH Enthusiast
iTrader: (4)
 
Joined: Jun 2007
Posts: 552
Likes: 0
Default

That's a damn nice car there friend.
Old 04-16-2009 | 05:13 PM
  #20  
PNYKLR-TA's Avatar
12 Second Club
iTrader: (1)
 
Joined: Mar 2008
Posts: 847
Likes: 0
From: North Phoenix, AZ
Default

thats a nice lookin mach man. you dont run those little *** rear tires for reals do you?


Quick Reply: 600 GSXR vs Mach 1 vs LS1 SS



All times are GMT -5. The time now is 08:01 PM.