Another C6 Z06 goes down
#81
That's cam only. It doesn't matter if the cam is custom or not, that's just silly.
Also, there is a LS2 C6 that ran a 10.6 bolt ons only, no cam, no heads, no spray nada.
A cammed C6Z06 is a fast car, but it's not going to beat any modern V8 car with a forged engine and FI.
#82
I am not questioning this because he has a Mustang. It could have been another guy with a Z28 camaro, forged 347ci and a T76mm turbo saying he beat a full bolt on kenny bell Ford GT by 4-5 cars I would have said the same thing!! Congrates OP on the WIN!!
#83
if he traps 106 and can pick up 34mph on the big end (not saying he would, but possible) then that would be 140 trap and one of the z06 on the previous page was trapping 135...5mph trap difference would be quite a bit i would think
#84
i don't think he meant stock cars.
#85
Again, good kill OP!! Bad *** CAR man would love to see it run though!!
#87
#88
#89
That's all I was alluding too. Any car with a forged motor and aftermarket blower is going to be putting down some power if they want to.
I'm not calling shenanigans on the OP like some. The weight savings only get you so far on the C6Z when you are up against that much HP. There are plenty of vids on youtube of 550rwhp Zs spanking 650rwhp GT500s, but as I'm sure you know, the OPs car doesn't have that much of a weight disadvantage and makes considerable more power.
#90
#91
I'm waiting 2 more years until the C7 comes out then I'll add it to my stable. I'm skipping the C6 entirely.. I like the C5 body style better.
Although 40k for a 2006 C6Z is tempting....
#92
I know of a reaaaaaal easy way to shut everyone up!!!! Run whatcha got.... should go low 9s at 150 to put 4 cars on a cammed z06 unless you did a 20 to 210mph roll lol Im tired of bench racing buddies cam only trapped 137 thats just what I go off of as far as cam only another guy i know went mid 10 with an ls3 anywho Just run the car n get it on video but it would take a thousand whp to trap 150 in the quarter.... i think thats what itr would take to beat a c6z with a cam from an average roll (45-145) call me a hater hahaha I am just bored and like to argue....
#93
I know of a reaaaaaal easy way to shut everyone up!!!! Run whatcha got.... should go low 9s at 150 to put 4 cars on a cammed z06 unless you did a 20 to 210mph roll lol Im tired of bench racing buddies cam only trapped 137 thats just what I go off of as far as cam only another guy i know went mid 10 with an ls3 anywho Just run the car n get it on video but it would take a thousand whp to trap 150 in the quarter.... i think thats what itr would take to beat a c6z with a cam from an average roll (45-145) call me a hater hahaha I am just bored and like to argue....
I think the guy in the C6Z06 on the last page should run the OP and get it on Video. They could make a few dig and a few roll passes. I would be will to pay a $100.00 bucks to each to race and get it on video and an additional $300.00 to the winner of the race. Any takers? It has to be these to guys only!! phatbeatnut and the OP
#95
however I dunno if we should put money on the line bc since the vid I have ported fast intake and forged pistons........ therefor I just need a bottle and Im good to go lucky for him itll be awhile before i spray it my goal is 9.9 on motor which this year with some seat time I think will happen!
#97
however I dunno if we should put money on the line bc since the vid I have ported fast intake and forged pistons........ therefor I just need a bottle and Im good to go lucky for him itll be awhile before i spray it my goal is 9.9 on motor which this year with some seat time I think will happen!
Last edited by odarabla; 02-01-2010 at 12:26 AM.
#98
LOL at people thinking a ******* T76 turbo, built motor, Mach 1 cant beat a cammed C6 Z06. Fanboiz are runnin wild!
Go to the 2:50 mark http://videos.streetfire.net/video/C...-SC_688176.htm
That C6 Z06 runs really hard (has beaten another heads & cam C6 Z06 around here, the driver knows his car well), and the GT that outruns it doesnt make 750 rwhp, weighs 3720 with driver, and had a passenger too.
Go to the 2:50 mark http://videos.streetfire.net/video/C...-SC_688176.htm
That C6 Z06 runs really hard (has beaten another heads & cam C6 Z06 around here, the driver knows his car well), and the GT that outruns it doesnt make 750 rwhp, weighs 3720 with driver, and had a passenger too.
#99
Full bolt on's, forged bottom end, heads and cammed Turbo Mach 1 @ 650ish rwhp vs. Full bolt-ons w/a cam Z06 @ 550 ish rwhp.
I believe the Mach will win.
Add a 100 shot to the Z06 and I'm pretty sure it'll be a different story.
Good kill OP, always nice to dethrone. Get a vid of the ZR1 run!!
I believe the Mach will win.
Add a 100 shot to the Z06 and I'm pretty sure it'll be a different story.
Good kill OP, always nice to dethrone. Get a vid of the ZR1 run!!