ZYBORG c5z vs KB COBRA vs Cammed c5z
04-18-2011, 11:30 AM
#4
10 Second Club
iTrader: (8)
Nice run again.... I new that kenne bell cobra would'nt be to far from ya....and I would be even closer and may nose him out beins I have a few extra mods. Have you done any weight reduction?
04-18-2011, 11:37 AM
#5
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: S. FL/TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Could have been a much better night if you had came... Pastelaso was telling me about your car, maybe some other time.
04-18-2011, 11:41 AM
#7
Teching In
Thread Starter
iTrader: (1)
Join Date: Feb 2011
Location: S. FL/TX
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
You and him would be an awsome race...
No, im 100% stock weight.
Trending Topics
04-18-2011, 01:35 PM
#10
On The Tree
iTrader: (4)
Join Date: Nov 2007
Location: H-Town
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
What if hell is wrong with all these Cammed Z06's you keep racing? or you racing the same one?
Intake/Exhaust UNTUNED Z06 racing a CAMMED Z06 "Hopefully tuned" if not... what a waste.. and your bumper to bumper!!
They not tuned? or what!!!.
anyway... good runs...
Intake/Exhaust UNTUNED Z06 racing a CAMMED Z06 "Hopefully tuned" if not... what a waste.. and your bumper to bumper!!
They not tuned? or what!!!.
anyway... good runs...
Last edited by cowboyup; 04-18-2011 at 01:41 PM.
04-18-2011, 01:42 PM
#11
LS1Tech Editor
iTrader: (4)
Join Date: Apr 2005
Location: NorCal and SoCal
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
When you say "Cam only" the car also has all the supporting mods, right? Headers, intake, tune etc? Or literally cam only? Sounds like it has LTs and exhaust.
04-18-2011, 04:20 PM
#15
10 Second Club
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
04-18-2011, 05:05 PM
#17
10 Second Club
Join Date: Jul 2010
Location: RI
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thats a possibility, but the cam only car clearly pulls slightly harder than the OP in 4th gear when it becomes a HP war.
That said, i wouldn't be thrilled if my cam'd car could barely walk its bolt on equivalent.
That said, i wouldn't be thrilled if my cam'd car could barely walk its bolt on equivalent.
04-18-2011, 05:11 PM
#18
10 Second Club
iTrader: (8)
the power under the curve may not be there as well as the stock cam. The intial hit looked better for Zyborg....and his driving...... I don't know...with the times my car turns with the stock ls6 cam it makes it hard for me to want to deal with a cammed car.
04-18-2011, 06:21 PM
#19
On The Tree
iTrader: (1)
Join Date: Jul 2005
Location: From Indy now San Diego
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Zyborg, if your pal will let you, switch cars so we can really see if that cam car runs any better. No reason it shouldn't pull more unless it's losing traction or the driver is granny shifting. And how big is the black car's cam? Anyway, maybe he just needs a set of 3.90's to make that cam shine. I know you went over this somewhat in previous threads, but you need a vid with you driving your friend's z and him yours, haha.
Hiossilver, average power should be better for that cammed car when going wot. Rev's shouldn't drop off low enough between shifts to hurt it when racing like that.
Hiossilver, average power should be better for that cammed car when going wot. Rev's shouldn't drop off low enough between shifts to hurt it when racing like that.
